Bedienungsanleitung Schwinn 510T (Seite 32 von 48) (Englisch)

737898

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

2. PushtheUserbuttontoselectthecorrectUserprole.IfyoudonothaveaUserprolesetup,youcanselectaUser

prolethathasnocustomizeddata(defaultvaluesonly).

3. Push the Manual Category button.

4. Push the START button to begin the Manual program.

Note: The Safety Key must be installed for a workout to begin. If not installed, the Console will display ,”INSERT

SAFETY KEY “. The Console will display “RAMPING UP” as the Walking Belt gets up to speed.

5. To change the Incline or Speed level, push the appropriate Increase or Decrease buttons. The time will count up from

00:00.

Note: ThemaximumtimeforaQuickStartworkoutis9hours,59minutesand59seconds(9:59:59).

6. When done with your workout, push PAUSE/STOP to pause the workout. Push PAUSE/STOP again to end the work-

out.

Note: The workout results are recorded to the current User Profile.

User Profiles

The Console lets you store and use 2 User profiles. The User profiles automatically record the workout results for each

workout, and allow the workout data to be reviewed.

The User profile stores the following data:

• Units

• Age

• Weight

• Lap (Distance of)

Select a User Profile

EveryworkoutissavedtoaUserProle.BesuretoselecttheproperUserProlebeforestartingaworkout.ThelastUser

that completed a workout will be the default user.

UserProlesareassignedthedefaultvaluesuntiltheyarecustomizedbyediting.BesuretoedittheUserProleformore

accurate calorie and heart rate information.

Edit User Profile

1. From the Power-Up Mode screen, push theUSERbuttontoselectoneoftheUserProles.

2. Push and hold down the USER and OK buttons for three seconds to access the Edit User mode.

Note:ToexittheUserProleoptions,pushthePAUSE/STOPbuttonandtheconsolewillgobacktothePower-Up

Mode screen.

3. If this is the initial User setup, the Console displays the UNITS prompt and the current value.

Use the User Option Increase() or Decrease() buttons to change the value. Push the OK button to accept the

displayed value.

4. The Console display shows the AGE prompt and the current value.

Use the User Option Increase() or Decrease() buttons to change the value. Push and hold down the Increase()

or Decrease()buttonstochangethevaluequickly.Push the OK button to accept the displayed value.

5. The Console display shows the WEIGHT prompt and the current value.

Use the User Option Increase() or Decrease() buttons to change the value. Push and hold down the Increase()

or Decrease()buttonstochangethevaluequickly.Push the OK button to accept the displayed value.

6. The Console display shows the LAP prompt. This option controls the length of distance for a LAP during a workout. Use

the User Option Increase() or Decrease() buttons to adjust the LAP distance value. The default is “0.25” miles or

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schwinn 510T Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Schwinn 510T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info