Bedienungsanleitung Schwinn 530 (Seite 35 von 50) (Englisch)

737318

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Reset a User Profile

1. From the Power-Up Mode screen, push the User button to select one of the User Proﬁ les.

2. Push the OK button to select the User Profile.

3. The Console display shows the EDIT prompt. Push the Decrease () button to change the prompt.

Note: To exit the User Proﬁ le options, push the PAUSE/STOP button and the console will go back to the Power-Up Mode

screen.

4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User Proﬁ le

option.

5. The Console will now confirm the request to reset the User profile (the default selection is ‘RESET - NO’). Push the

Increase() or Decrease() buttons to adjust the selection.

6. Push OK to make your selection.

7. The Console will go to the Power-Up Mode screen.

Changing Incline Levels

Push the Incline Level Increase() or Decrease() buttons to change the incline angle of

the Deck at any time with the Safety Key installed. To rapidly change the incline level push

the desired Pre-Set Incline Button, and then the Incline Enter Button. The Deck will adjust

to the selected incline level.

Note: After a Pre-Set Incline Button is pushed, the Incline Enter Button must be

pushed within 12 seconds.

Be sure the area below the machine is clear before lowering the Deck. Fully lower

the Deck after each workout.

Exercise on this machine requires coordination and balance. Be sure to anticipate

that changes in belt speed and incline angle of deck can occur during workouts, and

be attentive in order to avoid loss of balance and possible injury.

Be sure that the workout space you are utilizing has adequate height clearance, taking into

consideration the height of the user and the maximum height of the fully inclined Deck.

Changing Speed Levels

Push the Speed Level Increase() or Decrease() buttons to change the Belt Speed at any time in a workout program. To

rapidly change the Speed level push the desired Pre-Set Speed Button, and then the Speed Enter Button. The Walking Belt

will adjust to the desired speed.

Note: After a Pre-Set Speed Button is pushed, the Speed Enter Button must be pushed within 12 seconds.

Proﬁ le Programs

These programs feature different incline angles of the deck and belt speeds based on the maximum and minimum speed

supplied by the user. The user can also manually adjust the incline and speed values at any time during a workout. The Proﬁ le

Programs are organized into Categories (Quick Goal, Heart Health, Weight Control, Interval, Train, and Custom). Each Proﬁ le

Program has 16 segments allowing for a variety of workouts.

During a Proﬁ le Program, the Console will make an audio beep if the next segment of the workout has a change in

Incline or Speed. Be prepared for changes in Incline and Speed with each segment change.

INCLINE SPEED

INCLINE

0-12%

SPEED

km/hmph

19.3

12.8

9.6

6.4

3.2

Pre-Set Incline

Buttons

Incline

Enter

Button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schwinn 530 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Schwinn 530

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info