Bedienungsanleitung Scott Road Bikes 2018 (Seite 17 von 64) (Englisch)

779956

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISHENGLISH 33 |

ROAD BIKE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | ROAD BIKE

| 32

Stems for threadless systems – Aheadset®

In the case of SCOTT bikes with Aheadset® headsets the stem also serves to

adjust the bearing preload. If you change the position of the stem, you have to

readjust the bearing play (see the chapter “The headset on the SCOTT bike” and

the manuals of the component manufacturers on this SCOTT info CD).

The vertical setting range is determined by the intermediate rings, also referred

to as spacers (b). In the case of flip-flop stem models the stem can be mounted

the other way round (c) to achieve a different handlebar height.

For modifications unscrew the bolt at the top of the fork steerer tube which

serves to adjust the initial bearing pressure, remove the Ahead cap and release

the bolts on either side of the stem by up to three turns (d). Remove stem and

spacers from the fork steerer tube. In doing so keep hold of both frame and

fork to prevent the fork from slipping off the head tube. You can determine the

handlebar height by the arrangement of stem and spacers. Slip the remaining

spacers onto the fork steerer tube above the stem. Adjust the headset, as de-

scribed in the chapter “The headset on the SCOTT bike“.

If you want to turn the stem around, you have to also release the bolts of the

faceplate securing the handlebars (e). If the stem is ﬁtted with a cap, you can

simply take out the handlebars at this point. If it is not fitted with a cap, you have

to remove the handlebar fittings.

Mount the handlebars and, if necessary, the handlebar fittings, as described in

the chapter “Adjustment of handlebar tilt and brake lever/shifter units on SCOTT

road bikes and SCOTT cyclo-cross bikes” and/or in the manuals of the compo-

nent manufacturers on this SCOTT info CD.

Check after the adjustment or assembly, whether the handlebars are firmly seat-

ed in the stem by trying to rotate the handlebars downwards (f). Verify whether

the handlebar/stem-combination can be turned relative to the fork. Do this by

taking the front wheel between your knees and trying to twist the handlebars.

If there is movement, carefully tighten the bolts a little more by using the torque

wrench, observe the maximum torque value and check again the proper fit.

Tighten carefully by approaching the prescribed maximum torque value in small

steps (0.5 Nm increments) and check in between the proper fit of the component.

DANGER!

The stem is one of the load-bearing parts of your SCOTT bike. Changes to

it can impair your safety. If you are in doubt or if you have any questions,

contact your SCOTT dealer!

DANGER!

These routines require a certain amount of manual skill and (special) tools.

Ask your SCOTT dealer to explain you both function and adjustment of your

stem or let him do that work.

DANGER!

The bolted connections of stem and handlebars have to be tightened to

the prescribed torque values. If you disregard the prescribed values, the

handlebars or stem may come loose or break. Use a torque wrench and never

exceed the maximum torque values! You will find the prescribed values in the

chapter “Recommended torque settings for your SCOTT bike”, directly on the

components and/or in the manuals of the component manufacturers on this

SCOTT info CD.

DANGER!

Stems come in varying lengths (a) as well as shaft and binder tube diam-

eters. A stem of inappropriate dimension can become a source of danger:

Handlebars, stems or forks can break, resulting in an accident. When replacing

any parts be sure to only use parts that bear the appropriate mark and, to be on

the safe side, original spare parts from SCOTT or SYNCROS. Your SCOTT dealer

will be pleased to help you.

CAUTION!

If you choose to use the product of another manufacturer, make sure it is

compatible with the SCOTT/SYNCROS components. SCOTT assumes no

responsibility for problems resulting from the use of non-SCOT T/SYNCROS

products. Make sure the handlebar/stem-combination is approved by the han-

dlebar and/or stem manufacturer.

CAUTION!

Make sure the handlebar clamping area is free of sharp edges.

b ca e fd

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scott Road Bikes 2018 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scott Road Bikes 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info