Bedienungsanleitung Scott Road Bikes 2018 (Seite 18 von 64) (Englisch)

779956

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISHENGLISH 35 |

ROAD BIKE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | ROAD BIKE

| 34

4. Apply a thin and even layer of grease on the bearings before mounting the

fork in the frame. Make sure the clamping surfaces of the stem remain clear

of grease. Otherwise there is the risk that a secure clamping of the stem is

no longer possible. Apply special carbon assembly paste on the inside of

the stem as well as on the fork steerer inside and outside in the area of the

clamping. This increases the friction and ensures a secure fit.

5. Slide the expander into the carbon steerer until it is flush with the top of the

steerer.

6. Tighten the expander by using an 8-mm Allen key to a maximum torque

value of 4-5 Nm making sure that the expander stays flush with the top of the

steerer (e). Make sure there is no more than 2.5 mm between the top of the

stem clamp and the top of the steerer as shown on the illustration.

Never exceed the maximum torque value indicated by SCOTT! Ask your SCOTT

dealer to explain you both function and adjustment of your stem or, still better,

let him do that work.

DANGER!

In the case of turned stems, it is possible that the cables are too short. In

this case riding can be unsafe. If in doubt, ask your SCOTT dealer.

DANGER!

When removing spacers (a) the fork steerer tube must be shortened. This

change is irreversible. The shortening should be carried out by your SCOTT

dealer, but only after you have found your preferred position.

What to bear in mind with SCOTT bikes with carbon steerer

Always make sure before assembly to use a headset compatible with the stem.

We recommend the use of a SYNCROS stem and headset when mounting a

SCOT T/SYNCROS carbon fork, as they are designed to work together. If you

choose to use the product of another manufacturer, make sure it is compatible

with the SCOTT/SYNCROS fork. SCOTT assumes no responsibility for problems

resulting from the use of non-SCOTT/SYNCROS products.

Never use more than 40 mm stack height of spacers between headset and stem

(b). Never use more than 5 mm stack height of spacers above the stem between

the stem and the top cap of the headset (b). Do use a minimum of 5 mm stack

height of spacers below the stem between the cap of the headset and the stem.

1. The fork steerer, especially in case of a carbon steerer, must be assembled

with the originally supplied internal expander wedge. Never use a standard

star flanged nut on carbon fork steerers (c).

2. When cutting the steerer tube use handtools only. Do not use a power saw or

a speed cutter, but use a hand saw with a fine blade for metal cutting (d) and

a saw guide.

3. Once the steerer tube is cut to the desired length, be sure to remove all burrs

at the top of the steerer tube. Make sure to wear appropriate safety protec-

tion, safety goggles, gloves and breathing mask. Avoid inhaling the carbon

dust. Do not blow or sweep the dust off, but remove it with a moist rag. Dis-

pose of it immediately.

7. Clamp the stem onto the steerer tube with a maximum of 6 Nm (f) and

respect also the maximum torque value of the stem manufacturer. The lower

value indicated on these components has to be accepted as a maximum

torque value. Do not overtighten!

8. Make sure the stem has no sharp edges on the contact area for the steerer or

the handlebar. This could result in serious accidents. In case you change your

stem to another model or brand, please contact your authorized SCOT T/

SYNCROS dealer. SCOTT will not be liable in case a not originally provided

SCOTT or SYNCROS stem is used on the bike assembly. In case of further

questions, please contact your authorized SCOT T/SYNCROS dealer or the

national distributor of SCOT T/SYNCROS.

Top cap

Stem

Steerer tube

Spacers

max.

2.5mm

b ca e fd

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scott Road Bikes 2018 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scott Road Bikes 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info