Bedienungsanleitung Seagate BlackArmor Back-up (Seite 121 von 130) (Englisch)

468758

121

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

SP – slave (or no jumper required)

CS – cable select for master/slave: the purpose of the hard disk is determined by

its physical position with respect to the motherboard

PK – jumper parking position: the position where one can put the jumper if it is

not necessary in the existing configuration

The hard disk with the jumper in master position is treated by the basic input/output

system (BIOS) as bootable.

The jumpers on hard disks that are connected to the same cable can be in the cable

select for master/slave position. In this case, BIOS will deem as "master", the disk

that is connected to the IDE cable, which is closer to the motherboard than the

other one.

Unfortunately, hard disk markings were never standardized. You might well find that

markings on your hard disk differ from the ones described above. Moreover, for the old

types of hard disks, their purpose could be defined by two jumpers instead of one. You

should study the markings carefully before installing your hard disk in the computer.

It is not enough to physically connect the hard disk to the motherboard and set the

jumpers properly for the hard disk to function — hard disks have to be properly

configured with the motherboard BIOS.

B.2 BIOS

When you turn on your computer, you often see a number of short text messages

before you see the splash screen of your operating system. These messages are

from the POST (power-on self test) program that belongs to BIOS and is executed

by the processor.

BIOS, or the basic input/output system, is a program that resides in the permanent

memory chip (ROM or flash BIOS) on the motherboard of your computer and is its

key element. The version of BIOS that you use "knows" all the peculiarities of all the

components of the motherboard: processor, memory, integrated devices. BIOS

versions are provided by the manufacturers of motherboards.

Main BIOS functions are:

POST checking of processor, memory and I/O devices

initial configuring of all software-manageable parts of the motherboard

initialization of the operating system (OS) booting process

Among numerous components of the computer, initial configuration is necessary for

the external memory subsystem that controls hard disk drives, floppy disk drives,

CD-ROM drives, DVDs, and other devices.

B.2.1 Setup utility

BIOS has a built-in setup utility for initial computer configuration. To enter it, you

have to press a certain key combination (Del, F1, Ctrl+Alt+Esc, Ctrl+Esc, or

some other, depending on your BIOS) during the POST sequence that starts

immediately after you turn your computer on. Usually the message with the

required key combination is displayed during the startup testing. Pressing this

combination takes you to the menu of the setup utility that is included in your BIOS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seagate BlackArmor Back-up Seite 121

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info