Bedienungsanleitung Seat Alhambra 2018 (Seite 51 von 324) (Englisch)

817367

Zoom out

Zoom in

Vorherige Seite

1/324

Nächste Seite

The essentials

The jack may be applied only at the jacking

points shown (marks on chassis) ››› Fig. 68.

The mark indicates the jacking points below

the vehicle. The jacking points are on the ribs

behind the front edges ››› Fig. 69. Always the

relevant jacking point for the wheel to be

changed ››› .

Raise the vehicle using only the designated

jacking points.

For your own safety and that of other passen-

gers, the following points should be ob-

served in the order given:

Select a suitable flat and firm surface for

raising the vehicle.

Switch off the engine, engage a gear

(manual gearbox) or place the selector

lever in position P ››› page 193 and

turn on the electronic parking brake

››› page 188.

Block the wheel diagonally opposite the

wheel being changed with folding wheel

chocks* or other suitable objects.

When towing a trailer: unhook the trailer

from the towing vehicle and park it cor-

rectly.

Loosen the wheel bolts on the wheel to

be changed ››› page 47.

Look below the vehicle for the jacking

point ››› Fig. 68 closest to the tyre which

has to be changed.

Raise the jack with the handle until it

can be inserted below the jacking point.

Ensure that the foot of the jack is firmly

on the ground and that it is placed im-

mediately below the lifting point on the

vehicle ››› Fig. 69.

Straighten the jack and continue raising

it using the handle until the claw holds

the vertical reinforcement beneath the

vehicle ››› Fig. 69.

Raise the vehicle until the wheel is clear

of the ground.

WARNING

If the vehicle is not correctly raised, it could

fall off the jack causing serious injury. Please

observe the following rules to minimise the

risk of injury:

●You should only use a jack approved by

SEAT for your vehicle. Other jacks, even those

approved for other SEAT models, might slip

out of place.

●The ground should be firm and flat. If the

ground is sloped or soft then the vehicle

could slip and fall off the jack. If necessary,

support the jack on a wide solid base.

●If the ground is slippery, such as tiles,

place a non-slip surface (a floor mat, for in-

stance) beneath the jack to avoid slipping.

●Only fit the jack at the prescribed jacking

points. The claw of the jack should grip the

reinforcement nerve on the underbody

››› Fig. 69.

10.

●You should never place a body limb such as

an arm or leg under a raised vehicle that is

solely supported by the jack.

●If you have to work underneath the vehicle,

you must use suitable stands additionally to

support the vehicle, there is a risk of acci-

dent!.

●Never raise the vehicle if it is tilting to one

side or the engine is running.

●Never start the engine when the vehicle is

raised. The vehicle may come loose from the

jack due to the engine vibrations.

Removing and fitting the wheel

Fig. 70 Changing a wheel: loosen wheel bolts

with the socket at the end of the wheel brace

Removing the wheel

●Slacken the wheel bolts ››› page 47.

●Raise the vehicle ››› page 48.»

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Alhambra 2018 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Alhambra 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info