Bedienungsanleitung Seat Alhambra 2018 (Seite 52 von 324) (Englisch)

817367

Zoom out

Zoom in

Vorherige Seite

1/324

Nächste Seite

The essentials

●Using the hexagonal socket in the wheel

brace ››› Fig. 70, unscrew the slackened

wheel bolts and place them on a clean sur-

face.

●Take off the wheel.

Putting on the spare wheel

Check the direction of rotation of the tyre

››› page 50.

●Fit the wheel.

●Screw on the anti-theft locking bolt with

the adapter in position ››› Fig. 67 2 or 3

clockwise and tighten gently.

●Replace the other wheel bolts and tighten

slightly using the hexagonal socket on the

end of the wheel brace.

●Lower the car with the jack.

●Tighten all of the wheel bolts clockwise

››› . Tighten the bolts in diagonal pairs (not

in a circle).

●Put the caps, trim or full hubcap back on

››› page 46.

WARNING

If the wheel bolts are not treated suitably or

not tightened to the correct torque then this

could lead to loss of vehicle control and to a

serious accident.

●All the wheel bolts and hub threads should

be clean and free of oil and grease. The wheel

bolts should be easily tightened to the cor-

rect torque.

●The hexagonal socket in the wheel brace

should be used for turning wheel bolts only.

Do not use it to loosen or tighten the wheel

bolts.

Tyres with directional tread pattern

Tyres with directional tread pattern have

been designed to operate best when rotating

in only one direction. An arrow on the tyre

sidewall indicates the direction of rotation on

tyres with directional tread ››› page 294.

Always observe the indicated direction of ro-

tation in order to guarantee optimum grip

and help avoid aquaplaning, excessive noise

and wear.

If the tyre is mounted in the opposite direc-

tion of rotation, drive with extreme caution,

as the tyre is no longer being used correctly.

This is of particular importance when the

road surface is wet. Change the tyre as soon

as possible or remount it with the correct di-

rection of rotation.

Subsequent work

●On alloy wheels: replace the wheel bolt

caps.

●On plate wheels: replace the wheel hubcap.

●Return all tools to their proper storing loca-

tion ››› page 83.

●Check the tyre pressure of the newly moun-

ted tyre as soon as possible.

●If the vehicle is fitted with a tyre monitoring

system, this should be “reprogrammed” if

necessary whenever a tyre is changed

››› page 234.

●Have the tightening torque of the wheel

bolts checked as soon as possible with a tor-

que wrench ››› page 48. Meanwhile, drive

carefully.

Snow chains

Use

When using snow chains, applicable local

legislation and maximum permitted speed

limits must be observed.

In winter weather, snow chains not only help

to improve grip but also improve the braking

capacity.

Snow chains must only be mounted on the

front wheels, even on all-wheel drive vehi-

cles, and only with the tyre and rim combina-

tions listed below:

Tyre size Wheel rim

205/60 R16 6 1/2 J x 16 ET 33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Alhambra 2018 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Alhambra 2018

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info