276 If and when
Note
Although it is not necessary, previously remove the rigid cover ⇒ Fig. 210
for easier turn signal bulb changes.
Changing the main headlight bulb
The procedure for changing the bulb is the same on both
sides.
Fig. 208 Main beam
headlights
Fig. 209 Main beam
headlights
–Switch off the ignition and the lights.
–Raise the bonnet.
–Pull up on the rubber cover A ⇒ Fig. 208 to remove it.
–Remove the connector ⇒ Fig. 209 1 from the bulb.
–Press the spring ⇒ Fig. 209 2 inwards and to the right.
–Remove the bulb. pulling it from the connection terminal and
fitting fit the replacement so that it sits correctly in the cut-out
on the reflector. To ensure correct lighting, the filament must be
vertical. When changing the bulb, you can check the position of
the bulb through the headlight glass.
–Installation is in reverse order, ensuring that the rubber cover is
well fitted to the housing.
–Check whether the new bulb is working.
–Have the headlight settings checked as soon as possible.
