Bedienungsanleitung Seat Leon 2024 (Seite 360 von 406) (Englisch)

817342

360

Zoom out

Zoom in

Vorherige Seite

1/406

Nächste Seite

358

Wheels and tyres

It should be calibrated with the vehicle stopped

and its tyres cold. If calibrated while the tyres

are hot, the pressure check and calibration pro-

cedure should be repeated when cold before

the next trip.

●Switch the ignition on.

●Save the new inﬂation pressure in the Info-

tainment system: function button > Vehi-

cle info > Vehicle status ›››page37.

●OR: through the Service menu on the instru-

ment cluster ›››page31.

The tyre pressure loss indicator uses the

ABS sensors to compare the turns of each

wheel and, therefore, their tread circumferen-

ces, among other aspects. The set values are

collected and monitored after a long journey at

dierent speeds.

For example, if the wheels are under very heavy

loads, the tyre pressure must be increased to

the total recommended tyre pressure before

calibration ›››Fig.250.

WARNING

If the tyres are inﬂated to dierent pressures,

or to a pressure that is too low, a tyre may be

damaged and control of the vehicle may be

lost. This could lead to a serious or even fatal

accident.

●If the lamp lights up, reduce speed im-

mediately and avoid any sudden turning or

braking manoeuvres. Stop as soon as possi-

ble, and check the pressure and status of all

tyres.

●The tyre pressure loss indicator only works

correctly if all the tyres are at the correct

pressure when cold, and it is subsequently

calibrated according to the described pro-

cedure.

●If the tyres have no punctures and do not

need to be replaced immediately, drive to

the nearest specialist workshop at low speed

and have the tyre pressure checked and cor-

rected.

Note

●When driving for the ﬁrst time with new

tyres at high speeds, the tyres may expand

slightly, which may result in an air pressure

warning.

●If a low tyre pressure is detected when the

ignition is switched on, an audible warning

will sound. If the system fails, an audible sig-

nal sounds.

●Driving on unpaved roads for a long period

of time, or sporty driving, may temporarily

deactivate the system. The warning lamp

shows a fault, but disappears when road

conditions or driving behaviour change.

●Do not only rely on the tyre pressure mon-

itoring system. Check the tyres regularly to

ensure that the tyre pressures are correct

and that the tyres are free of damage such

as punctures, cuts, gouges and dents. Re-

move any non-puncturing objects from the

tyres.

●The tyre pressure monitoring indicator

does not function when there is a fault in the

ESC or ABS ›››page173.

Troubleshooting

Low tyre pressure

The control lamp switches on yellow.

The inﬂation pressure of one or more wheels is

much lower than the value set by the driver, or

the tyre has structural damage. In addition, a

audible warning sounds and a text message is

displayed on the instrument panel screen.

● Stop the vehicle! Stop the vehicle safely

as soon as possible.

●Check all tyres and pressures.

●Replace any damaged tyres.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Leon 2024 Seite 360

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Leon 2024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info