Bedienungsanleitung Seat Mii electric 2020 (Seite 143 von 232) (Englisch)

817313

143

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

Drive system and driving

display. Additionally, a warning acoustic sig-

nal may sound.

The purpose of the warning is to remember to

switch off the ignition before leaving the vehi-

cle.

WARNING

If the vehicle keys are used negligently or

without proper attention, accidents and se-

rious injuries can occur.

●Never leave any key inside the vehicle

when exiting. The key can connect the drive

system and certain electrical equipment

can be operated, such as electric windows,

which can cause serious injuries.

●When locking the vehicle, never leave

any child or anyone who may need help in-

side. They could be trapped in the car in an

emergency and will not be able to get

themselves to safety. Thus, for example,

depending on the season, a closed vehicle

can reach very high or very low tempera-

tures that can cause serious injuries and ill-

nesses or even death, especially in the

case of young children.

●Never remove the key from the ignition

lock when the vehicle is moving. The steer-

ing column lock could suddenly become

locked and it would be impossible to steer

the vehicle.

●The bit of the vehicle key must be com-

pletely unfolded and locked.

●Do not fix objects that exceed 100 g in to-

tal to the vehicle key.

Note

●If the vehicle key remains for a long time

in position 2 of the ignition lock with the

electric drive system disconnected, the 12-

volt battery will discharge.

●The key can only be removed from the ig-

nition lock if the selector lever is in position

P. If necessary, press the lock key on the

selector lever and release it again.

●The key can only be removed from the ig-

nition lock if the selector lever is in position

P. If necessary, press the lock key on the

selector lever and release it again.

Connecting the drive system

When the electric drive system is connected,

the electric engine is connected and the ve-

hicle is ready to move.

Requirements for connecting the drive

system

The drive system can be connected when the

following conditions are met:

●The level of charge of the high-voltage bat-

tery is sufficient.

●There is no charging cable plugged in.

●The temperature of the high-voltage bat-

tery is within the operating range.

Connecting the drive system

●Connect the ignition ››› page 140.

●Press the brake pedal and keep it pressed.

If the brake pedal is not pressed, the control

lamp comes on  in green and the instru-

ment panel displays the message The brake

pedal is not pressed.

●Set the selector lever to the N position or

engage the parking lock.

●Keep turning the key in the ignition lock

without stepping on the accelerator. Keep the

key in this position until the control lamp 

comes on. When the control lamp  come

on in the instrument panel display, release

the key. The needle of the power indicator

goes from  to .

●If the control lamp  does not turn on,

interrupt the process and repeat it.

●When you start to move, release the hand-

brake.

Noises before starting to move

When you connect the drive system you may

hear a “click”. This is quite normal, and no

cause for concern. »

141

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Mii electric 2020 Seite 143

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Mii electric 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info