Bedienungsanleitung Seat Mii electric 2020 (Seite 141 von 232) (Englisch)

817313

141

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

Drive system and driving

Brake energy recuperation

Fig. 135 On the selector lever: connect the

brake energy recuperation.

Fig. 136 On the instrument panel display: indi-

cation of recuperation levels.

The brake energy recuperation can generate

a braking effect. This braking effect depends

on the selected driving programme and the

level of charge of the high-voltage battery.

When braking the vehicle and when the vehi-

cle moves by inertia or travels downhill in the

deceleration phase, electric power is gener-

ated by the electric engine and stored in the

high-voltage battery. The electric engine

then operates as an alternator and produces

a engine brake effect. This process is called

brake energy recuperation.

The status of the recuperation is indicated in

the power display of the instrument panel

››› page 61. When recuperation is active, the

needle goes to the green area of the display.

The current recuperation level is displayed on

the instrument panel display ››› Fig. 136.

Given the case, in the application installed on

the smartphone you can view a statistic of

the energy recuperated over the last 30 mi-

nutes. Check the electronic instruction man-

ual of the application for this.

The effect of the engine brake is more or less

intense depending on the level of recupera-

tion. If the recuperation is very intense, the

brake light of the vehicle may also be switch-

ed on. As the charge level of the high-voltage

battery increases, the recuperation reduces

and, thus, the effect of the engine brake.

When the high-voltage battery is fully charg-

ed, no energy recuperation takes place and

the effect of the engine brake is not available.

When the vehicle detects that road condi-

tions do not allow safe contact between the

wheels and the road, the energy recupera-

tion is automatically reduced and, therefore,

the effect of the engine brake ››› .

Select a recuperation level

There are a total of 4 brake energy recupera-

tion levels. You can switch between recupera-

tion levels 1 to 3 by pressing the selector lever

slightly sideways towards ››› Fig. 135 + and

●Push the selector lever slightly to the left to

increase one recuperation level.

●Push the selector lever slightly to the right

to decrease one recuperation level.

●Push the selector lever to the right for a few

seconds to disconnect the recuperation.

To increase to recuperation level 4, push the

selector lever slightly to position B.. Pushing it

again gently in the direction of the arrow , it

is changed back to position D and the last re-

cuperation level that was selected is activa-

ted.

Recuperation level ››› Fig. 136 and mean-

ing:

0 The vehicle moves by inertia. Recupera-

tion only takes place when braking.

1 Slight recuperation, recuperation level 1

2 Medium recuperation, recuperation lev-

el 2 »

139

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seat Mii electric 2020 Seite 141

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seat Mii electric 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info