Bedienungsanleitung SEG HS 923 (Seite 16 von 16) (Deutsch, Englisch)

788844

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

6. When the appliance has ﬁnished charging, remove the mains adapter from

the wall socket and disconnect the USB-C charging cable from the appliance.

The hair straightener is now ready to use. Charging will take approx. 3-4 hours.

When the appliance’s battery is fully charged, you can use it for approx.

20 minutes at the highest temperature setting (220 °C).

During use, the charging indicator light will light up in ...

... white if the battery‘s capacity is above 60 %.

... orange if the battery‘s capacity is above 20 %.

The charging indicator light will ﬂash if the battery’s capacity is below

20 %. This is to indicate that the battery needs recharging.

You can also insert the USB-C charging cable directly into the socket at

the bottom of the appliance if you want to charge the appliance without

using the charging station.

Information on the rechargeable battery

• We recommend that you do not recharge the battery after each use.

To maintain the full charging capacity of the battery, only charge it if the

hair straightener has not been used for a longer period of time or if the

battery is almost ﬂat. In such cases it should be recharged fully.

Even if the hair straightener is not used, its battery should be fully

discharged and then recharged 2 times a year.

• Charge the battery at a temperature of between +10 °C and +40 °C.

• The battery will best hold its charge at room temperature. The lower

the temperature, the shorter the battery life. Very high temperatures

can also negatively affect the battery's capacity.

Use

WARNING – risk of ﬁre/burns

• The appliance heats up very quickly. It reaches 80 °C within just 30 seconds.

Do not touch the heating plates during use.

• The heating plates get very hot. During the heating phase and after use

(and until the plates have cooled sufﬁciently), either place the appliance

in the charging station or position it in such a way that the heating plates

are not touching any other objects. Ensure that any surface on which the

appliance is placed is heat-resistant.

Switching on the appliance and selecting the temperature setting

1. Slide the On/Off switch to ON.

2. To switch on the appliance, press and hold the Standby button for

approx. 3 seconds. The charging indicator light will light up in white or

orange (see chapter “Charging the battery”).

3. Press the Standby button again brieﬂy to select the desired

temperature setting 160 °C, 180 °C, 200 or 220 °C.

The corresponding temperature indicator light will ﬂash while the

appliance is heating up. As soon as the selected temperature has been

reached, the corresponding indicator light will glow continuously.

Time to heat up Temperature setting

approx. 2 minutes 160 °C

approx. 3 minutes 180 °C

approx. 3.5 minutes 200 °C

approx. 5 minutes 220 °C

117101 en Akku-Haarglaetter_v5.indd Druckbogen 8 von 8 - Seiten (8, 9)117101 en Akku-Haarglaetter_v5.indd Druckbogen 8 von 8 - Seiten (8, 9) 09.09.21 09:4709.09.21 09:47

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

SEG HS 923 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info