Bedienungsanleitung Seiko V192 Diver (Seite 8 von 17) (Englisch)

757543

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

6Push the crown back in to the normal position in accordance with a time signal.

The small seconds hand will start moving.

* The telephone time signal service is helpful for setting the seconds hand exactly.

* For models with screw down crown, please be sure to lock the crown after operating it.

5Pull out the crown to the second click

and set the time.

Pull out when the small seconds hand has reached

the 0 seconds position. (The small seconds hand

will stop moving.)

Turn the crown to advance the hands until the date

changes to the next. The time is now set for the A.M.

period. Advance the hands to set the correct time.

* Use the 24-hour hand to check whether the displayed

time is a.m./p.m.

* In order to set the time accurately, turn the minute

hand 4 to 5 minutes ahead and then return it to the

correct time.

EN 24

HOW TO SET THE TIME AND DATE

■ Manual date adjustment at the end of the month

It is necessary to adjust the date at the end of February and 30-day months.

Ex.) To adjust the date in the A.M. period on the first day of a month following a 30-day month

The watch displays “31” instead of “1.” Pull out the crown to the first click.

Turn the crown clockwise to set the date to “1” and then push the crown back in to the normal position.

* For models with screw down crown, please be sure to lock the crown after operating it.

Pull out the crown to the first

click

bCAUTION

•Avoid amending the date when the watch is displaying between 9 PM and 1 AM. Doing

so may cause damage.

EN 25

HOW TO SET THE TIME AND DATE

Stopwatch function

The stopwatch can measure up to 60 minutes in 1/5-second increments. After measuring 60

minutes, the stopwatch hands will automatically stop at the 0 minute 0 second position.

■ The names of the parts and functions of the stopwatch

Toggle to the “stopwatch display”. “Toggling between displays” → P. 19

1Center hand Þ stopwatch 1/5-

second hand

moves in 1/5-second increments

2Button A

Start/Stop

3Button B

Split/Reset

4Energy level hand Þ stopwatch

minute hand

moves in one-minute increments

EN 26

HOW TO USE THE STOPWATCH

■ Before using the stopwatch

The stopwatch on this watch can be started directly from the “charge level display”.

On the stopwatch display, use the following operation to reset the stopwatch if it has not been

reset. Do not use this operation otherwise.

Before using the stopwatch, reset it and check that the stopwatch hands (1/5-second hand, minute

hand) are stopped at “0 seconds and 0 minutes”. For how to reset the stopwatch, see the

illustration below.

* The stopwatch will not operate when the small seconds hand is moving every 2 seconds.

“About energy” → P. 35

•How to reset the stopwatch

* The stopwatch can be operated when the crown is at the normal position.

Button A

Button B

Current status

The stopwatch has

stopped.

The stopwatch is

operating.

Operate buttons A and B to

start the stopwatch

EN 27

HOW TO USE THE STOPWATCH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seiko V192 Diver Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seiko V192 Diver

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info