1. Press the “ON/OFF” button so that the horizontal bar on the bottom of the LCD
moves and sits above the AUTO that is printed on the front of the Timer.
2. Press the CD button to start the function. Pressing the CD button again cancels the
operation.
3. NOTE: After pressing the CD button the word ON or OFF will appear flashing on the
LCD.
4. Flashing ON: This means that the Timer will remain ON for the period that was
programmed in the Delay mode.
5. Flashing OFF: This means that the Timer will remain OFF for the period that was
programmed in Delay mode.
Activating the random function
The Random Function will turn an appliance ON or OFF on an irregular basis. Listed below
are the criteria governing this operation:
Minimum OFF time: 26 minutes
Maximum OFF time: 42 minutes
Minimum ON time: 10 minutes
Minimum ON time: 26 minutes
To activate the random function ensure that the Timer is in Clock mode and that it’s plugged
into an outlet.
Press the RND button once. The bottom left hand corner of the LCD will now show a
flashing “r OFF”. This indicated the Timer is now in Random mode and it will remain in the
OFF condition for a period anywhere between 26 to 42 minutes. It will then switch PN for a
period anywhere between 10 to 26 minutes and then switch OFF again.
Pressing the RND button will cancel the Random Function.
Clock mode
During clock mode, the LCD displays:
Day of the week (Monday at system reset)
Clock (0:00 at system reset)
Switching status (OFF at system reset)
'R' character if random switching is selected. (No 'R' displayed at system reset)
Override/Resume Preset Program
Press the “ON/OFF” button to override or resume a preset program. The horizontal bar on the
bottom of the LCD will move and sit about one of the three positions as listed below:
1. ON : override the preset program and Timer remains ON all the time
2. AUTO : resume preset program, Timer will turn ON and OFF automatically
according to its present program
3. OFF : override the preset program and Timer remains OFF all the time
NOTE: When Timer is in Random mode the Delay function cannot be activated.
