- 9 - 08/2019
Copyright © 2019, F
EN C
User'smanual
Prior to using this appliance, please read the user’
where you have pr
of appliances. Only use the appliance in the manner described in this user’
Keep this user’s
We rec
receipt and responsibility statement of the vendor or warran
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original bo
from the manufacturer
DESCRIPTION OF
A1 Display with control elements
A2 Front panel
A3 M
side)
A4 Travel wheels
A5 Wall mounting hooks
A6 R
A7 Wall mounting set (not shown)
DESCRIPTION OF
B1 Button ▲
B2 Button ▼
B3 On/Off/Child saf
B4 Progr
B5 Opera
B6 Day of the w
button
DESCRIPTION OF
C1 Power sa
C2 Frost-fr
C3 Programming icon
C4 Hours
C5 Day of the week icon
C6 Timer icon
C7 Heating icon
C8 Comfort mode icon
C9 T
C10 Lock icon
C11 Hour icon
C12 Minute icon
C13 Heating display
BEFORE FIRST USE
Before first use, take the appliance and its acc
and remove all promotional labels and stickers
any of its parts is damaged.
INST
The convection heater may be used as a
the travel wheels A4 ) or it may be mounted on aA4 must be
removed).
Warning:
Before any type of installation, always make sur
plug is disconnected from the power socket.
Installing the travel wheels
Put ablanket or another soft underlay on the floor
upside down on to this blanket.
On the underside of the convection heater there are thr
side. Align these holes with the holes in the travel wheels A4 and
self-tapping screws, screw them to the underside of the c
figure D. A4 ar
to the convection heater
Turn the cA4 .
Check that the wheels move freely and that they are not blocked in an
Wall moun
Before mounting the conv
the installation location has no wires, conduits, pipes
Likewise, prior to installation, remove the trA4 if they are installed.
Prior to installation, also check that the installation location is at a
from the power socket.
Warning:
Only use the supplied set of screws and dowels for the
installation. Under no condition should dowels and screws be
used that have adifferent diameter
which are not approved by the manufacturer as suitable f
installation of this type of product.
Drill holes of 8 mm diameter 40 mm deep into the wall as shown in figure E.
Insert the plastic dowel into the drilled hole and then the screw. Using a
secure the screw and leave it pr
Put the convection heater on t
on the hanging hooks A5 .
Warning:
The convection heater must be installed at least 15 cm abo
ground and 50 cm from the ceiling
be installed horizontally. A
performed by aqualified electrician. The c
not be installed behind doors or in an outdoor environment.
USING
Prior to first use, check that the voltage in y
voltage on the rating label.
Insert the power plug into apower socket.
Set the main switch A3 to position I(On). Asound will be made and the display A1
will be lit for aA1 turns off, the convection
heater will automatically switch to the stand-by mode
T
If the open lock icon is lit on the displayB3 to turn the
convection heater on.
If the closed lock icon is lit on the displayB3 for
approximately 3 seconds to canc
to the open lock , press the On/Off button B3 to turn the convection heater on.
When the convection heater is turned on, the temperatur
icon and heating icon C7 will be lit.
When you have finished using it, press the On/Off button B3 and the con
heater will turn itself off, how
turn off the convection heaterA3 to position 0 (Off
disconnect the power plug from the power socket.
Note:
Upon first use or after it has not been used for an extended period of
time, a
be emitted from the conv
will quickly disappear.
Child safety lock
The child safety lock function enables the display with the control elements A1 to be
locked and prevents accidental changes to y
TB3 for approximately
3 seconds. will be lit on the display. All the control buttons
will be disabled.
TB3 for
approximately 3 seconds .
Note:
The child safety lock function can be used even when the convection
heater is running, or alternatively when it is turned off in the stand-by
mode.
Selecting an operating mode
The convection heater has three oper
mode and Frost-fr
Repeatedly press the button B5 to toggle between the individual modes.
the selected mode (C1 , C2 or C8 ) will be lit on the display A1 .
When the convection heater is turned on, it will run in the power sa
icon C1 will be lit.
Note:
If the heating icon C7 is lit on the display A1 , this means that the
convection heater is running and is heating to the set temper
soon as the temperature is reachedC7 will turn off
and only the icon of the selected mode will remain lit.
The icon C7 will intermittently turn on and off while the con
heater is running.
the set temperature.
Comfort mode – when the room temperature falls 2
heating icon C7 will be lit and the convection heater will start. C7 will
remain continuously lit while the appliance is heating.
above the set temperatureC7 will turn off and the convection heater
will switch to the stand-by mode.
Pow – when the room temperature falls 4 °C below the set
temperature, the heating icC7 will be lit and the convection heater will start. The
heating icon C7 will remain continuously lit while the appliance is heating
temperature rises 4°C abovC7 will turn off and
the convection heater will switch to the stand-by mode
Frost-free mode – this mode prev
cooling of the room in which it is located.
when the ambient temperature falls to 5°C. As soon as the temperature rises above
7°C, the convection heater will turn itself off
Setting the temperature
The buttons ▲/ ▼ are used to set the operating t▲ or ▼
and▲/ ▼ to
set the desired temperatureB3
or wait approximately 10 seconds un
convection heater will automatically sav
Y
