759221

Sencor SCF 3200 Seite 10

10
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
- 10 - 08/2019
Copyright © 2019, Fast ČR, a.s.
Note:
Temperature can only be set in the energy saving mode and the
comfort mode. It is not possible to set the temperature in the Frost-
free mode.
Setting the day of the week and the clock
■ Hold down the button B6 until the day of the week icon starts flashing. Use the
buttons ▲/▼ to select the appropriate day of the week. Number “1” represents
“Monday”, number “7” represents “Sunday”.
■ Once the correct day of the week is selected, hold down button B6 until the hour
digit starts flashing. Use the buttons ▲/▼ to set the current hours.
■ Hold down the button B6 until the minute icon starts flashing. Use the ▲/▼
buttons to set the current minutes.
■ To save the day of the week and the clock settings, press button On/Off B3 or wait
approximately 10 seconds and the convection heater will automatically save your
settings.
Convection heater operation programming function
This function makes it possible to program the convection heater to start on any day of
the week at agiven time for aset period in the mode of your choice.
1. Press the programming button B4. The programming icon C3 and the weekday icon
will start flashing on the display A1.
2. Use the buttons ▲/▼ to select the day of the week and confirm your selection by
pressing the programming button B4.
3. The hour digits will start flashing. Use the buttons ▲/▼ to set the hour (60 minutes),
when the convection heater is to run.
4. Repeatedly press the button B5 to select the operating mode in which the
convection heater is to run in the given time. The selected operating mode will be
graphically shown on the display A1 – see table below.
5. To save your settings, press the On/Off button B3 or wait approximately 10 seconds
and the convection heater will automatically save your settings. And one hour (60
minutes) of operation will be programmed.
Repeat steps 1 – 5 to program the operation of the convection heater for other hours
of the day also for other days of the week.
Graphical display of the operating modes
Stand-by mode
– the convection
heater will be
turned off.
Frost-free mode Power saving mode Comfort mode
■ As soon as you finish programming operation for every day of the week, hold down
the programming button B4 for approximately 3 seconds. “P0” will start flashing on
the display A1 and to save the programming, press the On/Off button B3 or wait 10
seconds and the convection heater will save the program automatically.
■ To start the program, press the day and hour setting button B6. The timer icon C6
will appear on the display.
Note:
Steps 1 – 5 always program only asingle hour (60 minutes) of operation
of the convection heater.
If you need to adjust the set operation of the convection heater, it is
necessary to perform steps 1 – 5 below in the respective days and
hours and then save the program as P0.
■ The convection heater is also equipped with three preset programs – P1/P2/P3.
■ Hold down the programming button B4 until “P0” starts flashing. Using buttons
▲/▼ to select aprogram.
Program P1 Monday –
Sunday
00:00 – 01:00 Comfort mode
01:00 – 08:00 Power saving mode
08:00 – 24:00 Comfort mode
Program P2
Monday –
Friday
00:00 – 01:00 Comfort mode
01:00 – 05:00 Power saving mode
05:00 – 09:00 Comfort mode
09:00 – 19:00 Power saving mode
19:00 – 24:00 Comfort mode
Weekend
00:00 – 01:00 Comfort mode
01:00 – 08:00 Power saving mode
08:00 – 11:00 Comfort mode
11:00 – 13:00 Power saving mode
13:00 – 16:00 Comfort mode
16:00 – 20:00 Power saving mode
20:00 – 24:00 Comfort mode
Program P3
Monday –
Friday
00:00 – 01:00 Comfort mode
01:00 – 05:00 Power saving mode
05:00 – 09:00 Comfort mode
09:00 – 12:00 Power saving mode
12:00 – 16:00 Comfort mode
16:00 – 18:00 Power saving mode
18:00 – 24:00 Comfort mode
Weekend
00:00 – 01:00 Comfort mode
01:00 – 05:00 Power saving mode
05:00 – 24:00 Comfort mode
Restoring factory settings
■ In the event that it is necessary to cancel all your settings and programming, hold
down both the B4 and B5 buttons at the same time for approximately 3 seconds.
This will restore the factory settings and all your settings and programming will be
deleted.
Open window detection
■ The convection heater is equipped with a sensor that measures the room
temperature. When the temperature suddenly falls by at least 5 °C, the convection
heater will turn off automatically to reduce power consumption. Asudden fall in the
temperature is usually caused by awindow or door being opened.
Thermal protection
■ The appliance is equipped with athermal fuse that automatically turns it off upon
overheating.
■ Should such a situation occur, turn the appliance off and disconnect it from the
power socket. Then allow it to cool down for at least 15 minutes.
■ Before you put the appliance back into operation, check that its vents are not
blocked.
■ If you are unsuccessful putting the appliance back into operation, please contact an
authorised service centre.
CLEANING AND MAINTENANCE
■ Disconnect the power plug from the power socket and allow the appliance to cool
down before cleaning it.
■ For cleaning, do not use cleaning products with an abrasive effect, solvents, etc. that
could damage the surface of the appliance.
Warning:
To prevent the risk of injury by electrical shock, do not submerge
the appliance, power cord or power plug in water or any another
liquid.
■ Keep the appliance in aclean condition. Clean the appliance regularly to ensure dust
does not accumulate inside.
■ To clean the outer surface of the of the appliance, use aclean, dry cloth. To remove
dust from the outer surface, you may also use avacuum cleaner.
Storage
■ When not using the appliance for an extended period of time, disconnect the power
plug from the power socket, allow the appliance to cool down and clean it according
to the instructions in chapter “Cleaning and maintenance”.
■ Before storing it, check that the appliance and all its accessories are thoroughly clean
and dry.
■ Store the appliance in a dry, clean and well-ventilated location not exposed to
extreme temperatures and out of children’sreach.
TECHNICAL SPECIFICATIONS
Rated voltage range ........................................................................................................220–240 V~
Rated frequency........................................................................................................................50/60Hz
Rated power input ......................................................................................................................1500W
Temperature range ................................................................................................................15–35°C
Protection class .................................................................................................................................IP24
Power output settings ...............................................................................................750W/1500 W
We reserve the right to change text and technical specifications.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling hand over
these appliances to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
… 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SCF 3200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info