759014

Sencor SCP 3701 Seite 5

5
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
- 5 - 03/2020
Copyright © 2020, Fast ČR, a.s.
EN Single Induction
Cooktop UltraFlat
User'smanual
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Air inlet (along the sides of the
appliance)
A2 Hotplate
A3 Fan and air outlet (on the underside
of the appliance)
A4 Control panel with display
DESCRIPTION OF THE CONTROL PANEL
B1 Timer indicator light
B2 Child lock indicator light
B3 Display – shows the hotplate power
level, set temperature, automatic
shut-off time or error message
codes. If the cooktop is in the stand-
by mode, the display will show
"OFF".
B4 Temperature indicator light
B5 Power level indicator light
B6 Child lock button
B7 Timer button
B8 Minus (–) button
B9 Slider for quick setting of power
level / temperature
B10 Plus (+) button
B11 Function selection button
B12 On/Off button
Before first use
■ Before first use, take the appliance and its accessories out of the packaging material
and remove all promotional labels and stickers. Check that neither the appliance nor
any of its parts is damaged.
■ Wipe the surface of the appliance with aclean, lightly dampened cloth. Then wipe
it dry.
Induction and selecting suitable cookware
■ Underneath the hotplate there is an induction coil that, when turned on, creates
avariable electromagnetic field. The induction current generated by this field starts
heating the bottom of the pot or pan that is placed on the hotplate. To ensure
proper operation, it is important that the cookware is ferromagnetic. This property
can be verified using asmall magnet placed against the bottom of the pot or pan.
If there is an attraction between the magnet and the bottom of the pot or pan then
the cookware is ferromagnetic and hence suitable for use on an induction hotplate.
This includes, for example, cast iron, steel, enamelled and stainless steel cookware
with aferromagnetic bottom.
■ We recommend that the base of the cookware is flat and straight. The minimum
diameter of the base is 12 cm, the maximum diameter may be up to 2 cm past the
edge of the hotplate. The induction hotplate automatically adapts to the size of the
used pot or pan.
■ If, on the other hand, there is no attraction between the magnet and the bottom of
the pot or pan then the cookware is not suitable for use on an induction hotplate.
As arule, this includes cookware made from copper, pure stainless steel, aluminium,
glass, wood, ceramics, stone, etc.
Note:
When unsuitable cookware is used or if the hotplate detects that there is
no cookware on it, then it will turn off automatically. This is anormal safety
feature that prevents damaging the appliance.
RADIO WAVE INTERFERENCE
■ The use of the induction cooktop may cause interference to your radio, television
or similar receivers.
■ If this occurs, we recommend to:
- redirect the radio or television antenna;
- move the cooktop farther away from the radio, television or receiver;
- insert the power plug into adifferent power socket with an independent circuit.
Operating the appliance
■ Place the appliance on akitchen countertop or on atable within reach of apower
socket. At the same time, make sure that all safety instructions are followed.
■ Make sure that there are no foreign objects located on the hotplate A2 and that
its surface is clean.
■ Fully unwind the power cord and connect it to apower socket.
Note:
Since the appliance heats up during operation, the power cord must be
located in such away that it is not touching the surface of the appliance.
Note:
Plug the appliance into aseparate power socket with an independent
circuit breaker. Necessary circuit breaker – 16A.
Turning on the cooktop
■ To turn on the cooktop, press button B12. The display B3 will show "ON".
■ Place apot or pan on the hotplate A2.
■ Press the function selection button B11. The appliance automatically detects the
pot or pan. If the used cookware is suitable, the appliance will start automatically
at the preset power level. The display B3 will show the preset power value and the
fan A3 will start.
■ If the used cookware is not suitable, the appliance will not start. The error message
E0 will appear on the display B3 and the appliance will beep. After awhile the
appliance will automatically switch to the stand-by mode.
■ If you take the cookware off the hotplate A2, the display B3 will show the
error message E0 and the appliance will beep. After a while the appliance will
automatically switch to the stand-by mode. The display B3 will show "H" or "OFF".
Turning off the cooktop
■ When not using the cooktop, press button B12 to turn the cooktop off. The display
B3 will show "H" or "OFF". The cooktop will switch to the stand-by mode. If the
temperature of hotplate A2 is higher than 80°C, then display B3 will show "H" after
being turned off. As soon as the temperature of the hotplate A2 falls below 80°C,
the "H" will disappear from the display B3.
■ Disconnect the power plug from the power socket.
Note:
The fan A3 will run for acertain time after the cooktop is turned off so that
it cools down faster. Do not pull the power plug out of the power socked
until the fan A3 turns off completely.
Note:
When first turned on, there may be light smoke emitted. This is an entirely
normal event, which will disappear after afew minutes.
Setting the power level
■ When the cooktop is turned on for the first time, it will start at the preset power level.
■ Press the function selection button B11 until the power level indicator light B5 is lit.
■ To set the power level, use buttons – / + or the slider B9. The power level can be set
in the range 200 W– 2,000 W.
Note:
Prior to setting the power level, always ensure that the power level
indicator light B5 is lit. If it is not, first press the function selection button
B11.
Setting the temperature
When the cooktop is turned on for the first time, the preset temperature is set to
"120°C".
Press the function selection button B11 until the temperature indicator light B4 is lit.
To set the temperature, use buttons – / + or the slider B9. You can set the temperature
in the range from 60 to 240°C.
Setting the power level and automatic shut-off
■ Press the function selection button B11 until the power level indicator light B5 is lit.
Then press the timer button B7. The display B3 will show "0:00". Using the buttons
– / +, set the time after which the cooktop will automatically turn off, in the interval
from 1 minute to 3 hours. The automatic shut-off is set in one-minute increments.
■ The set automatic shut-off time will start flashing on the display B3 for approximately
5 seconds and then the appliance will automatically switch to the power level
setting. The default power will appear on the display B3. To set the power level, use
buttons – / + or the slider B9.
■ The set time will start counting down on the display B3.
■ During the set time, the set power level can be set using buttons – / +, or the slider
B12.
■ When the set time elapses, the cooktop will beep and automatically switch to the
stand-by mode. The display B3 will show "H" or "OFF".
Setting the temperature and automatic shut-off
■ Press the function selection button B11 until the temperature indicator light B4 is
lit. Then press the timer button B7. The display B3 will show "0:00". Using the buttons
– / +, set the time after which the cooktop will automatically turn off, in the interval
from 1 minute to 3 hours. The automatic shut-off is set in one-minute increments.
■ The set automatic shut-off time will start flashing on the display B3 for
approximately 5 seconds and then the appliance will automatically switch to the
temperature setting. "120°C" will appear on the display B3.
■ To set the temperature, use buttons – / + or the slider B9.
■ The set time will start counting down on the display B3. The countdown time and
the set temperature will be intermittently shown on the display B3.
■ During the set time, the set temperature can be set using buttons – / +, or the slider
B12.
■ When the set time elapses, the cooktop will beep and automatically switch to the
stand-by mode. The display B3 will show "H" or "OFF".
Child safety lock
■ The appliance is equipped with achild lock function that enables the control panel
to be locked to prevent unwanted changes to the settings.
■ To activate the child lock function, hold down button B6 for awhile. Indicator light
B2 will be lit and the control buttons will be disabled.
■ To deactivate the child lock function, hold down button B6 for awhile. The indicator
light B2 will turn off.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SCP 3701 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info