- 9 - 06/2020
Copyright © 2020, F
Note:
Perform the rinsing process also when you have not used the espr
machine for an extended period of time.
The pump will make a
is normal.
Brewing an espresso
1. Place aA8 . Set the height of the
brewing head A8 by sliding it up or down depending on the size of your cup
or glass – see figure F . If the cup or glass is too tall, you may r
tray A11 . After removing the cup or glass, rA11 to its place.
2. Press button B12 and the button will be backlit.
3. The espresso machine will automatically start the coffee grinding, dosing and
tamping process, and will dispense it.
4.
automatically switch to the stand-by mode.
Brewing latté macchiat
1. Set up the system for automatic frothing as described in section "Setting up the
system for automatic fr".
2. Pour milk into the milk jug A13 . Put on the lid A14 and ensure that it is firmly seated.
Note:
T rich and creamy foam, it is recommended to use pr
cooled milk (approx. 5°C) with aminimum fat content of 3%.
3. Place aA8 . Set the height of the
brewing head A8 by sliding it up or down depending on the size of your cup
or glass – see figure F . If the cup or glass is too tall, you may r
tray A11 . After removing the cup or glass, rA11 to its place.
4. B11 to brew a latté macchiato or button B10 to brew
acappuccino. Pr
5. The espresso machine will automatically start the latté macchiato or cappuccino
brewing process.
6. As soon as the espr
automatically switch to the stand-by mode.
7. Disconnect the connecting tube A15 from the hole in the brewing head A8 and
place the milk in aA15 ,
wind it around the lid A14 – see figure G .
Frothing milk
1. Set up the system for automatic frothing as described in section "Setting up the
system for automatic fr".
2. Pour milk into the milk jug A13 . Put on the lid A14 and ensure that it is firmly seated.
Note:
T rich and creamy foam, it is recommended to use pr
cooled milk (approx. 5°C) with aminimum fat content of 3%.
3. Place aA8 . Set the height of the
brewing head A8 by sliding it up or down depending on the size of your cup
or glass – see figure F . If the cup or glass is too tall, you may r
tray A11 . After removing the cup or glass, rA11 to its place.
4. Press buttB11 twice to brew aB10 to brew
acappuccino. Pr
5. Press the button again when there is asufficient amoun
6. The espresso machine will then automatically switch to the standby mode
7. Disconnect the connecting tube A15 from the hole in the brewing head A8 and
store the milk in aA15 ,
wind it around the lid A14 – see figure G .
Dispensing hot water
1. Place aA8 . Set the height of the
brewing head A8 by sliding it up or down depending on the size of your cup
or glass – see figure F . If the cup or glass is too tall, you may r
tray A11 . After removing the cup or glass, rA11 to its place.
2. Press button B9 twice. backlight will be lit and the espresso
machine will start dispensing hot water.
3. The dispensing of hot water will st
turn off.
Note:
If you need to stop the dispensing of hot water soonerB9
once and the water dispensing process will stop
USER SETTINGS
Setting the amount of ground coffee
Use the ground coffee amount adjustment when the br
or too weak.
Button B8 serves to adjust the amount of ground coffee.
Based on personal preferences, select the amount of gr
pressing button B8 : small (approx. 7 g), medium (approx. 8 g) or large
(approx. 10 g).
Setting the dispensed coffee volume
The espresso machine enables the volume of dispensed coffee to be adjust
according to your pr
of the espresso machine.
1. Place acup, mug or glass underneath the brewing head A8 .
2. Turn on the esprB7 .
3. Press the button of the bevB12 for
brewing aB11 for brewing alatté macchiato or
button B10 for brewing acappuccino
4. As soon as the espresso machine starts dispensing frothed milk, hold down the
button of the selected beverage until the required v
into the cup. Release the button, two beeps will be made and the v
milk will be saved to the memory of the appliance.
5. When as the espresso machine starts dispensing coffee, hold down the button
of the selected beverage until the required volume of c
Release the button, two beeps will be made and the volume of coffee will be sav
to the memory of the appliance.
Hot water settings
1. Place acup, mug or glass underneath the brewing head A8 .
2. Turn on the esprB7 .
3. Press button B9 twice.
4. As soon as the espresso machine starts dispensing hot water, hold doB9
until the required volume of hot wat
and the volume of hot water will be saved t
Note:
T
proceed according to the instructions in section "Setting the mode ".
Setting the mode
The appliance can be set to an ECO mode, a
In ECO mode, great
prepared faster than with the default factory settings.
ECO mode Fast mode Default
settings
Indicator light No Ye Ye
Pre-steam * Ye No Ye
Automatic shut-off time 10 minutes 30 minutes 20 minutes
Option to set the
dispensed coffee volume Ye Ye Ye
*Note:
The pre-steam function means that the ground coffee is first steamed with
a
when it is subsequently fully steamed, its flavour will be dev
and its aromatic compounds and essential oils will be fully extracted.
1. In the stand-by mode, press and hold down button B7 for 5 seconds. Button B7
will start flashing and at the same time other buttons will also be flashing or lit
depending on the mode that is set.
Cappuccino
button Latté button Espresso button
ECO mode Lit Flashing Flashing
Fast mode Flashing Lit Flashing
Default settings Flashing Flashing Lit
2. TB10 , to set the fast mode press button B11
and to reset to default settings, press buttB12 . After setting a
beeps will be made. In the event that you attempt to set amode tha
the appliance will not react to the button being pressed.
3. If you do not wish to change the mode settings, press button B7 once more,
or wait 5 seconds until the appliance automatically switches back to the stand-b
mode.
CLEANING AND MAINTENANCE
Disconnect the power plug from the power socket and allow the appliance t
down before cleaning it.
Warning:
For cleaning, do not use cleaning pr
solvents, etc. that c
appliance is intended for washing in adishw
