10/2018
- 11 -
Copyright © 2018, F
In the automatic cleaning mode, along-the-wall cleaning mode and spiral
cleaning mode, the control button LED indicatA9 is lit green. In the return
to charging station mode, the conA9 will be lit red.
DIRECTION BUTTONS ▲◄►
The direction buttons D8 , D9 andD18 can be used to manually control the
movement of the robotic vacuum cleaner on the floor
cleaner is moved on the floor
brushes A18 and A23 is synchronised with the mov
wheels A15 and A21 . T
When the direction button D8 is pressed, the robotic vacuum cleaner will
move forward. FD8 .
When button D8 is released, the vacuum cleaner will stop mo
When direction button D9 is pressed, the vacuum cleaner will turn
anticlockwise. D9 .
When button D9 is released, the vacuum cleaner will stop mo
When direction button D18 is pressed, the vacuum cleaner will turn clockwise.
TD18 . When
button D18 is released, the vacuum cleaner will stop mo
If the robotic vacuum cleaner is docked in the charging station B1 , when
any direction button is pressed the robotic vacuum cleaner will mo
approximately 80 cm frB1 , turn around by 180° and
switch to the stand-by mode. P direc
direction of movement.
If the robotic vacuum cleaner is in a cleaning mode or returning to the
charging station, when any direction button is pr
will stop and switch to the stand-by mode. P
control the direction of movement.
In the manual movement control mode
according to the direction buttons and sensors A11 and A27 prev
with obstacles and falling from stairs.
SETTING AND CANCELLING REPE
MODE
This function enables the setting of repetition for the automatic cleaning
mode or to cancel it.
the set number of cleaning cycles. At the end of each cleaning cycle, it will
automatically return to the charging station tB3 and
the next cleaning cycle will always commence when the charging cycle has
finished.
be lowered by one cycle.
Hold down button B11 to switch to the mode f
automatic cleaning cycles. Indicator D3 will start flashing and the number of
cleaning cycles will be shown on display D1 .
cycles. Amaximum of 3 repetitions may be set. In the even
cleaning mode repetition mode function is already set, then the number of
remaining cycles will be shown on display D1 . Select the number of repetitions
using buttons D9 (+) andD18 (–). Hold down button D11 to save the setting.
The saving of your setting is confirmed by an acoustic sig
Note:
The mode for setting the number of cleaning cycles will automatically
be cancelled and display D1 will switch to the time display mode if no
changes are made within 10 seconds.
remain in memory.
If the robotic vacuum cleaner is parked in the charging station B1 and the
charging cycle is finished, the robotic vacuum cleaner will immediately
commence the automatic cleaning cycle and the number of repetitions will be
reduced by one cycle. If the robotic vacuum cleaner is in the charg
the charging cycle will first finish and only then will the vacuum cleaner start
the automatic cleaning cycle.
If the robotic vacuum cleaner is not docked in the charging station B1 and is
switched to the stand-by mode or sleep mode, it is necessary to start the first
cleaning cycle manually.
by one cycle. In the event that the operation of the robotic vacuum cleaner
is interrupted and then started again, the number of cycles will, likewise, be
lowered by one cycle.
When the robotic vacuum cleaner is in the automatic cleaning mode, it will
complete it first and return to the charging staB1 . When the charging
cycle is complete, the robotic vacuum cleaner will start the automatic cleaning
cycle and the number of repetitions will be reduced by one cycle.
The repetition of automatic cleaning mode function is cancelled by pressing
button D8 once in the repetition setting mode. Indicator D3 and the number
of repetitions will turn off.
acoustic signal.
of repetitions to 0 cycles or by turning the vacuum cleaner off and on using
switch A20 .
SETTING THE
Hold down button D12 to switch to the time setting mode.
start flashing on display D1 . Use the direction buttons D9 (+) andD18 (–) to set
the minutes. Hold down the button to speed up the setting pr
Press button D12 to swit
flashing on display D1 . Use the direction buttons D9 (+) andD18 (–) to set the
hours. Hold down the button to speed up the setting proc
Hold down button D12 to save the curren
will confirm the setting by an acoustic signal.
The current time setting mode will automatically be cancelled and display D1
will switch to the time display mode if no changes are made within 10 seconds
The setting will not be stored in memory.
SETTING AND CANCELLING THE PLANNED CLEANING FUNCTION
This function is used to set a time in advance, when the robotic vacuum
cleaner is to start automatic cleaning.
Hold down button D19 to switch to the time setting mode f
cleaning. Indicator D13 will be lit and the minutes will be shown on display D1 .
Use the direction buttons D9 (+) andD18 (–) to set the minutes. Hold down the
button to speed up the setting process.
Press button D19 to swit
flashing on display D1 . Use the direction buttons D9 (+) andD18 (–) to set the
hours. Hold down the button to speed up the setting proc
Hold down button D19 to save the setting
confirm the setting by an acoustic signal. Display D1 will swit
time display mode. After another 30 seconds the remotB4 will switch
to sleep mode.
Press button D19 to wake up the rB4 from the sleep mode. P
button D19 again to show the time of the planned cleaning. After 5seconds
the display D1 will switch back to the current time display mode
cleaning function is not set, then in the display planned cleaning mode,
display D1 will show
Note:
The planned cleaning time mode will automatically be cancelled and
display D1 will switch to the time displa
within 10 seconds.
This function enables the setting of only asingle planned cleaning time.
the automatic cleaning at aplanned time is star
for another planned cleaning it is necessary to set this function again.
In the event that at the time of the planned cleaning, the robotic vacuum
cleaner is in the cleaning mode or returning to the charging station B1 , the
planned cleaning will only take place next time at the planned cleaning time
when the robotic vacuum cleaner is not in operation.
The planned cleaning function and repetition of automatic cleaning can be set
simultaneously.
aplanned time, the number of repetitions will be reduced b
The planned cleaning function is cancelled by pressing button D8 once in the
planned cleaning time setting mode.
The previous time setting will remain stor
power supply to the vacuum cleaner on and off using switch A20 will cancel
the function. In the event that batteries are removed fr
B4 or they go flat, the planned cleaning function and time setting will be reset.
SLEEP MODE AND
The remote control B4 will aut
seconds of inactivity. In this mode, only the time is shown on the display D1 .
Press any buttB4 from the sleep mode
display D1 will show other information such as the operating mode indicator
battery level, planned cleaning function indicator D13 and the repeated
automatic cleaning function D3 , if set. For the display D1 t
information, the robotic vacuum cleaner must be within signal range of the
remote control
TROUBLESHOOTING
The robotic vacuum cleaner is itself able to identify problems and r
via awarning acoustic signal. If this happens, the v
when one of the control buttons on the display D1 of the rB4
is pressed, it will show the error message code
D11, D12 and D19, the error message code is shown only when the button is
used to confirm asetting.
The table below will help you identify the cause and to r
Once the problem is resolved
operation.
