- 6 - 11/2019
Copyright © 2019, F
EN Steam sta
User'smanual
DESCRIPTION OF
A1 Steam station
Stand with compartment for power
cord and steam hose
A3 2-litre water tank
A4 Carry handle
A5 Iron rest surface
A6 Holder for steam hose and power
cord
A7 Power c
A8 Steam hose
A9 Control panel
A10 I
B1 Water tank unit
B2 Filling opening lock
B3 Cassette with filter against limescale
and dirt
B4 Spring latch
Serves to release and attach the
water tank to the steam station.
B5 Cassette plug
C1 On/Off button
C2 Steam mode selection button
C3 Limescale protection system reset
button
C4 Power On indicator
C5 Power-saving mode indica
(ECOmode)
C6 MAX steam output indicator
(MAXmode)
C7 Replacement of limescale and dirt
filter required indicator
D1 handle
D2 T
steam regulator
D3 Soleplate
D4 St
D5 T
D6 Rest surface
BEFORE FIRST USE
P
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’
Keep this user’s
In the event that you hand this appliance over t
include this user’smanual
W
receipt and responsibility statement of the vendor or warran
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original bo
from the manufacturer
Bef
and labels from the steam station and iron. D3 with a
dampened cloth before first use and then wipe dry.
PREP
Sort the laundry according to international symbols shown on the textiles or
according to the fabric types.
SYMBOL F SETTING THE
TEMPERA
Synthetics (acrylic, acetate,
polyester
•
Low temperature
Cotton with addition of other
types of fibres; silk, wool, wool
with addition of other types of
fibres, etc.
••
Medium temperature
Corduroy •••
High temperature
Flax MAX
maximum temperature
Fabrics
USING
FILLING THE W
BefA3 , check that the steam station is disconnected from
the power socket.
T
form, if you live in an area with har
lifetime of the iron, we rec mixture of 50% tap wa
distilled water
Attention:
Never add water softeners, vinegar
or other additives to the water
PA1 with
one hand and press the spring latch B4 on the underside of the water tank A3 with
the otherA3 . Slide out the filling opening lock B2
and fill up the water tank A3 with water
past the level marked as MAX .
TA3 can also be filled up without sliding it out of the steam station A1 .
In such aB2 and fill the water tank A3 with
water up to the MAX mark using asuitable container.
Note:
The non-stop system enables water to be added tA3
even while the steam station is in operation without having t
off.
Insert the water tank A3 back into the steam station A1 . C
water tank A3 is accompanied by an audible click from the spring latB4 .
TURNING ON
CC4 will
be lit and indicator C6 will start flashing, which indicates that the steam station is
heating up. Once the indicator C6 is lit permanently
use.
UD2 on the iron, set the desired temperatur
indicator D5 will be lit indicating that the iron is heating up. Onc
thermostat reaches the correct temperature, indicaD5 will turn off.
PUTTING THE IRON ASIDE
YD6 on the underside of the
iron or on to rest surface A5 on the steam station A1 .
IRONING WITHOUT STEAMING
TA3 .
Set the temperD2 on the iron A10 to MIN and wait until indicator D5 turns
off.
IRONING WITH STEAM
T
ECO:
low power use; it uses less steam and sav
ironing result. Selection of the ECO mode is indicated by ag
of indicator C5 .
MAX:
ironing. Selection of the MAX mode is indicated b blue illumination of
indicator C6 .
Attention:
In order to iron with steam, the water tank A3 must be filled with wat
If you wish tD2 on the iron A10 to an
appropriate temperature and wait unD5 turns off.
Note:
Indicator D5 may turn on and off while ironing, indicating that
temperature is automatically being maintained without int
to the ironing process.
PC2 on the control panel A9 to select steam mode ECO or M
until the indicator of the selected mode remains permanently lit.
Note:
When steam ironing after selecting the steam mode on a cold
steam station, it is necessary to hold down button D4 on the iron
for approximat
throughout the entire steam circuit syst
Holding doD4 on the iron, will start releasing steam while ironing.
If you wish tD4 .
W
ironing linen fabrics, strong silk or similar fabrics is it recommended to select the
MAX mode.
IRONING WITH VERTICAL STEAM
T
garments hanging on coat hangers, etc.).
Set the temperD2 on the iron A10 to MAX and wait unD5
turns off. P
the fabric and vertically move the iron vertically from bottom up and press button
D4 to release steam.
Tip:
When ironing cotton or linen textiles, gently place the ir
soleplate D3 on to the fabric.
keep the iron approximately 2 cm off the fabric
Do not use the steam function for silk and synthetics so as not to
damage the fabric.
Attention:
Never point the steam at people!
