Bedienungsanleitung Sencor SSI 5421 (Seite 8 von 10) (Englisch)

759886

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

EN-8

Steam Iron

SSI 5420RD / SSI 5421TQ

2015 06/2015

6. TURNING OFF

• When you have ﬁnished using it, set the continuous steam control lever A5 to the position marked

with the symbol and turn the temperature dial A9 to the MIN position. Disconnect the power

cord from the power socket and allow the soleplate Aqs to cool down. When the soleplate Aqs has

cooled down, pour out the water from the water tank Aqa into a sink.

TIPS FOR QUALITY IRONING

• Do not ﬁll the washing machine drum with too much laundry, otherwise it will be overly crumpled

up. You can also avoid overly crumpled laundry by setting a lower spin drying speed.

• If you are ironing fabrics from blended materials (e.g. 40% wool and 60% synthetic material), set

the temperature dial according to the material which is ironed at a lower temperature.

• If you do not know the composition of the fabric, identify the suitable temperature dial setting

by ironing a piece of the fabric from the underside. Start by setting the temperature dial at a low

temperature and gradually increase it until the ideal temperatures is achieved.

• Never iron over places that have sweat marks or other stains. The high temperature ﬁxes the stain,

making it difﬁcult to remove.

• To avoid silk, wool and synthetic fabrics from being shiny after ironing, iron them from the underside.

• Some materials are easier to iron when they are lightly damp.

• Spray ﬁne fabrics with the spray before ironing them or iron them under a lightly damp wiping cloth.

MAINTENANCE AND CLEANING

Cleaning the exterior parts of the iron

• Before cleaning, make sure that the continuous steam control lever A5 is set to position , the

temperature dial A9 is turned to the MIN position and the power cord is disconnected from the

power socket. Allow the soleplate Aqs to cool down. Flip open the cap A6 and then empty out the

water tank Aqa into a sink. Close the cap A6 again.

• Wipe the soleplate Aqs and the outer surface of the iron with a lightly dampened cloth. Then wipe

everything dry.

• Do not use metal items, petrol, solvents or abrasive cleaning products, etc. for cleaning to avoid

damaging the surface. Do not submerge the iron in water.

Removing limescale deposits

• For the removal of limescale deposits from the inner part of the soleplate Aqs, the iron is equipped

with a Self-Clean function. Use the Self-Clean function regularly at least once every 14 days.

• Make sure that the continuous steam control lever A5 is set to position and that the iron

is disconnected from the power socket. Fill the tank Aqa with water up to approximately half

its capacity. Do not add vinegar or other limescale removers into the water. Connect the iron to

a power socket. Set the temperature dial A9 to maximum and wait until the indicator light A2

turns off. Disconnect the iron from the el. power socket and hold it in a horizontal position above

the sink. Press the Self-Clean button A0 and hold it down. Steam and hot water will start to be

emitted from the soleplate Aqs. At the same time also limescale deposits from the inner parts of

the soleplate Aqs will be removed. Gently move the iron from side to side until the water tank

Aqa is completely empty. After emptying it out, release the button A0. If the soleplate Aqs is very

soiled, you can repeat this process once more.

• After completing the Self-Clean process, reconnect the iron to the power socket and allow it to heat

up to maximum temperature in order to dry out the soleplate Aqs. Iron over a piece of unneeded

fabric to remove water stains that formed on the soleplate Aqs during the cleaning process. Then

set the temperature dial A9 to the MIN position, disconnect the iron from the power socket and

allow it to cool down. Finally, wipe the soleplate Aqs using a clean cloth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SSI 5421 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info