Bedienungsanleitung Severin BA 3222 (Seite 12 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

603045

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

∙ This steam iron is to a large extent

resistant to hard water (up to 15º dH).

Although normal tap water may be

used, it is advisable to use distilled,

demineralised or decalciﬁ ed water.

Should you be unsure about the hardness

of the water in your area, please enquire

of the relevant local authority department.

∙ Turn the steam control button to its ‘dry

ironing’ position (

∙ Open the cover of the water ﬁ ll hole.

∙ Fill the empty water reservoir using

the measuring cup provided. Fill to the

indicated “Max” level only.

∙ Close the water ﬁ ll hole.

Anti-drip function

If the temperature of the soleplate is not

sufﬁ cient to produce steam, the water supply

is cut off automatically to prevent dripping.

General information about ironing

Always check ﬁ rst whether a label with

ironing instructions is attached to the article

to be ironed.

∙ The meaning of the ironing symbols is as

follows:

• synthetics

(low temperature)

•• silk and wool

(medium temperature)

••• cotton and linen

(high temperature)

∙ These markings can also be found on the

temperature control knob of the steam

iron in form of dot symbols.

∙ Laundry to be ironed should be

sorted according to the fabric ironing

temperature. Follow the ironing symbols

and start with the lowest temperature.

∙ When ironing highly sensitive fabrics, or

if you are not sure about the fabrics, you

may carefully test-iron at a non-visible

point, e.g. inside of seam. Start with the

lowest temperature.

∙ If the laundry is being dried in a dryer

before ironing, the temperature should be

adjusted to “iron dry”. Very dry fabrics are

difﬁ cult to iron.

Start up

Clean the steam iron before using for the

ﬁ rst time, according to the instructions

given in the paragraph ‘Cleaning and care -

Self-cleaning system’. This will result in the

removal of possible dust particles from the

soleplate and subsequently lessen the smell

typically encountered when ﬁ rst switching

on.

Please ensure sufﬁ cient ventilation.

Ironing

∙ Steam ironing requires high temperatures.

The temperature level for steam ironing

is indicated on the temperature control

knob.

∙ After ﬁ lling the reservoir with water, place

the steam iron upright on its base stand

and insert the plug into the wall socket.

∙ As soon as the steam iron is connected

to the mains, the red indicator light comes

on.

∙ Set the temperature control knob to the

required ironing temperature as indicated

by the ironing symbols.

∙ The indicator light will go out once the

required ironing temperature is reached.

∙ Before ironing any fabrics, the soleplate

should be cleaned by passing it over an

old, clean cotton cloth, while using the

steam jet function; this helps to ﬂ ush out

any dirt residues or lint particles trapped

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin BA 3222 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info