Bedienungsanleitung Severin BA 3222 (Seite 13 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

603045

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

inside the openings in the soleplate.

∙ The steam output can be adjusted with

the steam control button or completely

switched off for dry ironing.

∙ For dry ironing, the water reservoir may

be empty. Should there be water left in

the reservoir, the steam jet function may

also be used when dry-ironing at higher

temperature settings.

∙ Place the steam iron upright on its base

stand after use and remove the plug from

the wall socket.

Automatic switch-off

If the appliance is switched on but not

being used for a certain period of time, it

will automatically switch off. The automatic

switch-off is indicated by a sequence of

6 beep signals; in addition, the indicator

light is ﬂ ashing. As soon as the appliance is

moved, it will switch on again.

Horizontal position:

With the iron standing on its soleplate, it

will switch off after approx. 30 seconds of

inactivity.

Vertical position:

When upright on its base stand, the iron

will switch off after approx. 8 minutes of

inactivity.

Steam Jet

When the steam jet button is depressed, an

additional hot steam jet is emitted from the

soleplate. This function can be very useful

when the regular amount of steam emitted is

not sufﬁ cient to remove stubborn creases or

when ironing difﬁ cult or thick fabrics.

The steam jet function may also be used

with the iron held vertically, to remove

creases or wrinkles from fabrics.

Using the Spray Nozzle

The laundry can be dampened by pressing

the spray button. This will help to smooth

out difﬁ cult areas. The spray nozzle may be

used at any temperature level during dry or

steam ironing.

Cleaning and care

∙ Before cleaning the appliance, ensure it is

disconnected from the power supply and

has cooled down completely.

∙ To avoid the risk of electric shock, do not

clean the appliance with water and do not

immerse it in water.

∙ If necessary, the unit may be wiped with a

dry fuzz-free cloth.

∙ Starch, fat and other deposits on the

soleplate may be removed with a woollen

cloth soaked in a vinegar-water solution.

∙ Do not use abrasives or harsh cleaning

solutions.

∙ Do not put vinegar or other descalers into

the water reservoir.

Self-cleaning system

The self-cleaning system ﬂ ushes out loose

mineral deposits and keeps the appliance

free of lime and dust particles. Self-cleaning

should be performed if the iron has not

been used for an extended period of time,

or otherwise every 10-15 days. Proceed as

follows:

∙ Half-ﬁ ll the water reservoir with water.

∙ Place the iron on its base stand and insert

the plug into the wall socket.

∙ Set the temperature control to its

maximum.

∙ Turn the steam control button to its ‘dry

ironing’ position (

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin BA 3222 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info