operation, the pestle should remain
inserted.
– While the appliance is running, feed the
prepared pieces of fruit into the chute,
using the pestle to push it lightly down.
– Caution: Too much pressure may result
in damage to the motor or the insert.
– When processing larger quantities of
fruit or vegetables, the lter basket and
the juice container must be emptied from
time to time.
Operation setting
– Set the speed control to Max.
G. Blender
– e blender cannot be used unless the
bowl has been properly tted; otherwise
the safety switch is not activated:
– Fit the bowl.
– Place the lid on the bowl and turn it anti-
clockwise to lock.
– Remove the safety lid from the blender
mounting by turning it clockwise to
unlock.
– Place the blender jug on its mounting and
turn it anti-clockwise to lock.
– Put in the ingredients, then t the blender
lid and lock it by turning anti-clockwise.
– To add ingredients during operation,
remove the small stopper in the centre of
the blender lid; turn clockwise to unlock it.
–A er processing, switch o the appliance
and remove the blender jar by turning it
clockwise and li ing it o .
– Caution: Do not let the blender unit run
dry (i.e. without any contents).
– Maximum ll amount:
1 litre of liquid, or
300g of fruit, or
250 ml ice cubes
Operation settings
– For so er types of fruit and vegetables, a
suitable speed setting between 2 and Max
should be selected.
– Select Max speed for harder fruits and
vegetables.
– Always use the Pulse switch for crushing
ice.
– Short-term operation:
When using the blender, please note that
the appliance is designed for short-term
operation only - it must not be operated
for more than 20 seconds at a time. Switch
o the appliance a erwards and allow
su cient time for it to cool down before
resuming operation.
General care and cleaning
Turn o the appliance a er use, remove
the plug from the wall socket and wait
until the motor has come to a complete
standstill.
To avoid the risk of electric shock, do not
c
lea
n the appliance with water and do not
immerse it in water.
– e housing may be wiped with a slightly
damp, lint-free cloth.
– Attachment parts should be thoroughly
cleaned immediately a er use, using hot
water and a mild detergent.
Do not put the attachments in a dish
washer except for the slicing and
shredding inserts.
Do not use abrasives or harsh cleaning
solutions.
Caution: When cleaning the chopping
blade and slicing or shredding inserts,
beware of sharp edges and blades - these
can be extremely dangerous.
– Always store the chopping/mincing blade
in its protective plastic cover.
– Use only the spatula to remove food
residue from the bowl.
– Hint: e blender unit should be cleaned
immediately a er use; put l litre warm
water with a little detergent into the
jug and let the blender run for about
20 seconds as described in the section
Operation. Rinse the blender jug, lid
and stopper thoroughly with clean water
a erwards and wipe dry, repeating the
process if necessary.
14
