Bedienungsanleitung Severin SM 3798 (Seite 11 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

602873

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Short-time operation

The appliance is designed to process

average domestic quantities of food. With

the blender or chopping attachment, it

may be operated without interruption for a

maximum of 1 minute at any switch setting,

after which it should be allowed to cool down

for approximately 3 minutes. When using

the whisk attachment, it may be operated

without interruption for a maximum of 2

minutes at any switch setting. Allow it to cool

down to room temperature for approximately

3 minutes afterwards.

Operating button

The blender is equipped with 2 push-type

operating buttons and a speed control.

Operating button

the speed can be adjusted with the speed

control.

Operating button TURBO:

highest speed setting.

Operation

∙ When ﬁ tting the blender attachment to the

drive unit, ensure that the arrow mark on

the drive unit and the open-lock symbol

on the attachment are aligned: to lock,

turn the attachment so that the arrow is

aligned with the lock symbol.

∙ Always use a suitable container for

operation. A tall container with a ﬂ at base

is best.

∙ Push the blender attachment down into

the ingredients in the bowl before brieﬂ y

switching the appliance on with the

operating or turbo button.

∙ Make sure that the unit can rotate freely

inside the bowl and is not blocked during

operation.

∙ As soon as the operating or turbo button

is released, the appliance will switch off.

Always wait until the motor has come to

a complete standstill before lifting the

blender attachment from the mixture.

∙ Always remove the plug from the wall

socket after use.

Attachments

Always wait until the motor has come to a

complete standstill and remove the plug

from the wall socket before changing any

attachments.

The attachments are ﬁ tted to the drive unit.

Ensure that the markings on the drive unit

and attachments are correctly aligned.

Chopping attachment

∙ Caution: Exercise extreme care: the

blades are very sharp. When handling the

blades, always hold them by the upper

protective plastic covering.

∙ Fit the cutting blade unit into the bowl

before ﬁ lling the bowl with the food to be

chopped.

∙ Place the lid on the bowl.

∙ Attach the drive unit to the lid of the bowl

and turn to lock; ensure that the arrow

and lock symbols are properly aligned.

∙ Insert the plug into the wall socket and

press the turbo button in brief bursts

until the mixture has reached the desired

consistency. During processing, the lid

and bowl should be securely held in

place.

∙ Avoid overﬁ lling the bowl; it may be ﬁ lled

with herbs etc. up to two thirds maximum.

Before the bowl is ﬁ lled, the food to be

processed should be cut into pieces of

about 1 cm.

∙ Do not ﬁ ll the bowl with hot liquid or hard

material such as ice cubes, nutmegs,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin SM 3798 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info