Bedienungsanleitung Sharp ARM205 (Seite 47 von 96) (Englisch)

26406

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

USER SETTINGS

Rotation copy

0: OFF

1: ON

• When the auto paper select function is enabled

and there is no paper that is the same size as

the original and loaded in the same orientation,

this function will automatically select paper of

the same size that is loaded in the opposite

orientation, and rotate the image 90 degrees so

that it is copied on the paper in the correct

orientation.

• When the auto ratio select function is operating

and the original and paper are loaded in

opposite orientations, this function rotates the

image so that it is copied on the paper in the

correct orientation.

Auto paper select mode

0: OFF

1: ON

• This function automatically selects paper that is

the same size as the original placed in the

SPF/RSPF, or the same size as that selected

with the [ORIGINAL SIZE ENTER] key. The

function can be disabled.

Auto tray switching

0: OFF

1: ON

• If the paper runs out during printing and there is

paper of the same size and orientation in

another tray, this function automatically

switches to that tray (excluding the bypass

tray). The function can be disabled.

to 15 Auditing mode – See "Enabling Audit Mode". (p.50)

Erase width

adjustment

1: 0"

2: 1/4"

3: 1/2"

4: 3/4"

5: 1"

• Use this setting to set the width of erasure of

shadows that appear around the edges and at

the binding margin when a book or similar

original is copied.

Layout in 2 IN 1 copy

1: Pattern 1

2: Pattern 2

• Use this setting to select the layout pattern

when two original pages are copied onto a

single sheet of paper (see page 34 for the

layout patterns).

Layout in 4 IN 1 copy

1: Pattern 1

2: Pattern 2

3: Pattern 3

4: Pattern 4

• Use this setting to select the layout pattern

when four original pages are copied onto a

single sheet of paper (see page 34 for the

layout patterns).

Offset of paper output

tray

0: OFF

1: ON

• When enabled, this function offsets the position

in the paper output tray of interrupt copy jobs,

sets of copies during sort/group copy, and print

jobs when using the printer function.

Image rotation in

duplex copying

0: OFF

1: ON

• When a one-sided vertical (portrait) original is

placed in a horizontal orientation (8-1/2" x 14"

or 11" x 17" size) for two-sided copying, the top

and bottom of the images on the front and back

of the paper will be opposite to each other.

Location of the

margin

*2,*3

1: Left edge

2: Top edge

• Use this setting to switch between the margin at

the top edge and the margin at the left edge.

Margin width

1: 0"

2: 1/4"

3: 1/2"

4: 3/4"

5: 1"

• Use this setting to set the margin width.

Resolution in Auto/Text

mode

1: 300dpi

2: 600dpi

• The copy resolution in auto and text mode is

normally 300 dpi. If high-quality copies are

preferred, use this setting to change the

resolution to 600 dpi.

Program

number

Program name

Setting codes

(factory default setting

appears in bold)

Explanation

On models with a dual function board.

On models with automatic two-sided copying.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp ARM205 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp ARM205

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info