Bedienungsanleitung Sharp EL-2901PIII (Seite 5 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

480456

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

REPLACEMENT OF BATTERY

FOR MEMORY PROTECTION

Time for battery replacement

Life of the memory protection battery is approximately 2,500 hours at

25°C(77°F) with the power plug not connected to the socket.

* When the memory protection battery is weak, the date/time setting is initialized

(1/1/2006, 12:00:00 a.m.).

Verify the date/time setting in the date/clock display mode when connecting

the power plug to the socket.

If the date/time setting is modified or incorrect, promptly replace the memory

protection battery with new one.

(The life of the pre-installed battery may be shorter than expected because of

the time the calculator spends during shipment.)

Method of battery replacement

Use one lithium battery (CR2032).

Caution: Replacing the battery will clear the date and time settings, and the

stored tax rate.

1) Turn the power switch “OFF” and unplug the power supply plug from the

outlet.

2) Remove the battery cover on the back of the unit. (Fig. 1)

3) Remove the exhausted battery and install one new lithium battery. Wipe the

battery well with a dry cloth and place the plus “+” side upward. (Fig. 2)

4) Replace the battery cover by reversing the removal procedure.

5) Press the RESET switch on the back of the unit (See “RESETTING THE

UNIT”).

After battery replacement

• Connect the power supply plug to an outlet and turn the power switch “ON”.

Check that “0.” is displayed. If “0.” is not displayed, remove the battery,

reinstall it, and check the display again.

• Readjust date, time, and tax rate settings.

• On the battery replacement date label found on the back of the unit, write

down the month and year when the battery is replaced, as a reference for

the next battery replacement.

Precautions on battery use

• Do not leave an exhausted battery in the equipment.

• Do not expose the battery to water or flame, and do not take it apart.

• Store batteries out of the reach of small children.

Fig. 1 Fig. 2

SPECIFICATIONS

Operating capacity: 12 digits

Power supply:

Operating: AC: 220V-230V, 50Hz

Memory backup: 3V ... (DC) (Lithium battery CR2032 × 1)

Memory Protection Battery lifespan:

About 2,500 hours (While at 25°C (77°F), and the power plug is not

connected to the socket.)

CLOCK SECTION

Accuracy: Within ±90 seconds per month average (at 25°C(77°F))

Items to be displayed: day, month, year, hour, minute, second

Items to be printed: day, month, year, hour, minute

Time system: 24 hour

PRINTING SECTION

Printer: Mechanical printer

Printing speed: Approx. 2.1 lines/sec.

(At temperature 25°C (77°F), when “741•9 + ” is printed. The printing speed

will vary with the number of rows and the figure types to be printed.)

Printing paper: 57 mm(2-1/4") - 58 mm(2-9/32") wide 80 mm(3-5/32") in

diameter (max.)

Operating temperature: 0°C – 40°C (32°F – 104°F)

Power consumption: 51 mA

RESETTING THE UNIT

Strong impacts, exposure to electrical fields, or other unusual conditions may

render the unit inoperative, and pressing the keys will have no effect. If this

occurs, you will have to press the RESET switch on the bottom of the unit.

The RESET switch should be pressed only when:

• an abnormal event occurs and all keys are disabled.

Notes:

• Pressing the RESET switch will clear the date and time settings, the tax

rate setting, and the contents of memory.

• Use only a ballpoint pen to press the RESET switch. Do not use anything

breakable or anything with a sharp tip, such as a needle.

• After pressing the RESET switch, connect the power supply plug to an

outlet. Turn the power switch “ON” and check that “0.” is displayed.

Dimensions: 193 mm (W) × 255 mm (D) × 60.5 mm (H)

(7-19/32" (W) × 10-1/32" (D) × 2-3/8" (H))

Weight: Approx. 1.02 kg (2.25 lb.) (with battery)

Accessories:

1 lithium battery(installed), 1 battery replacement date label (attached on

the unit's back body), 1 paper roll, 1 ink roller (installed), and operation

manual

WARNING

THE VOLTAGE USED MUST BE THE SAME AS SPECIFIED ON THIS

CALCULATOR. USING THIS CALCULATOR WITH A HIGHER VOLTAGE

THAN THAT WHICH IS SPECIFIED IS DANGEROUS AND MAY RESULT

IN A FIRE OR OTHER TYPE OF ACCIDENT CAUSING DAMAGE. WE

ARE NOT RESPONSIBLE FOR ANY DAMAGE RESULTING FROM USE

OF THIS CALCULATOR WITH A VOLTAGE OTHER THAN THAT WHICH

IS SPECIFIED.

EL-2901PIII(AXO)(Hu)-Eng 07.11.7, 8:16 PMPage 3 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp EL-2901PIII Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info