Bedienungsanleitung Sharp GX-BT60 (Seite 4 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

787660

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

• If you receive an incoming call at an inconvenient time, let your voice mail answer it

for you.

• Let the person you are speaking to know you are driving; if necessary, suspend the

call in heavy traﬃ c or hazardous weather conditions. Rain, sleet, snow, ice, and heavy

traﬃ c can be hazardous.

• Do not take notes or look up phone numbers while driving. Remember that your

primary responsibility is driving safely.

• Do not engage in stressful or emotional conversations that may be distracting.

• Make people you are talking to aware you are driving and suspend conversations that

can divert your attention away from the road.

• In the case of  re, traﬃ c accidents, medical or other serious emergencies, dial the local

emergency number.

• Call roadside assistance or a special non-emergency wireless assistance number when

necessary.

Care and Handling

Your SHARP Bluetooth device is a precision engineered instrument. To ensure its

ongoing performance, you should look after it as you would any quality consumer

electronic product, and use it in accordance with the instructions.

SHARP recommends that you take the following precautions.

• Avoid leaving your device in direct sunlight, such as on the dashboard or console of a

car or truck. Do not leave your device unattended in your vehicle.

• Do not leave your device, or use your device, in any area where the temperature may

exceed 60 degrees Centigrade (140 degrees Fahrenheit), such as inside a closed car

on a hot day.

• Remember that on a hot day the temperature inside a closed car may be signi cantly

higher than the outside air temperature.

• Do not leave your device, or use your device, in any area where the temperature is

likely to drop below 0 degrees Centigrade (32 degrees Fahrenheit).

• Do not use any household or industrial grade detergents or cleaners to clean your

device. If your device becomes dirty or smeared, in most instances a wipe with a dry or

slightly damp cloth should be suﬃ cient to clean it.

• Do not leave your Bluetooth device connected to a power supply for long periods

after it is fully charged. SHARP does not recommend long periods of continued

charging.

• Before charging your SHARP device, make sure that the cable is not damaged. If you

notice any abnormalities, seek advice from a quali ed professional.

• If traveling internationally, ensure that your SHARP wall or car power adapter is

approved for use in the country where you plan to use it and hat the adapter voltage is

suited to the local power supply.

• Should a fault develop with your SHARP product, contact SHARP for advice on how

to proceed.

• Do not attempt to repair or alter any SHARP product yourself.

Approved Accessories

The use of accessories not approved by SHARP, may cause your SHARP device to

malfunction or in the case of non-approved electrical accessories may cause the device

to exceed RF energy exposure guidelines.

Use of non approved accessories will void your device’s warranty.

Electromagnetic Interference

Nearly every electronic device is susceptible to electromagnetic interference (EMI) if

inadequately shielded, electromagnetic con gured for electromagnetic compatibility.

Similar to a mobile phone, your SHARP device is a low power transmitter / receiver and

is covered by regulations pertaining to such devices. Turn oﬀ your SHARP device in any

facility where posted notices instruct you to do so. These facilities may include hospitals

or health care facilities that may be using equipment that is sensitive to external RF

energy.

• When instructed to do so, turn oﬀ your SHARP device when on board an aircraft. Any

use of a mobile device must be in accordance with applicable laws, regulations and

airline crew instructions.

• Some Bluetooth devices may interfere with some hearing aids. In the event of such

interference, you may want to consult your hearing aid manufacturer or physician to

discuss alternatives.

• If you use any other personal medical device, consult the manufacturer of your device

to determine if it is adequately shielded from RF energy. Your doctor or physician may

be able to assist you in obtaining this information.

• If you are in doubt about whether your SHARP device be safely turned on or

used, please consult an authorised person in the location you want to use your

SHARP device. If no authorised person is available or you remain uncertain, SHARP

recommends that you turn oﬀ your Bluetooth device and any mobile phones unless

they are required in an emergency situation.

How to remove the battery for disposal

RISK OF INJURY. WEAR GLOVES WHEN WORKING!

The battery should be removed by an authorized Sharp service centre. Not doing

so will invalidate any guarantees and warranties on your device.

1. Use a  at screwdriver to gently prize away the fabric cover.

2. Remove the 5 screws with Philips screwdriver on middle plastic cover.

3. Take oﬀ the middle plastic part.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp GX-BT60 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info