Bedienungsanleitung Sharp GX-BT60 (Seite 6 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

787660

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

4. Disconnect the battery connector from the board and remove the battery.

Disposal of this equipment

• Do not dispose of this product as unsorted municipal waste. Return it

to a designated collection point for the recycling of WEEE in accordance

with local law. By doing so, you will help to conserve resources and

protect the environment.

• The shown above appears on electrical and electronical equipment (or the packaging)

to remind users of this.

• Users are requested to use existing return facilities for used equipment and batteries.

CE and UKCA statement:

• Hereby, Sharp Consumer Electronics Poland sp. z o.o. declares that this audio device

is in compliance with the essential requirements and other relevant provisions of RED

Directive 2014/53/EU and UK Radio Equipment Regulations 2017.

• The full text of the EU declaration of conformity is available by following the link

www.sharpconsumer.com and then entering download section of your model and

choosing “CE Statements”.

What is included in the box:

• 1 x SHARP GX-BT60

• 1 x USB to Micro USB charging cable

• 1 x 3.5mm to 3.5mm Aux audio cable

• 1 x User manual

Panels & Controls

1. Power – short press to power on/oﬀ

2. – Bluetooth Indicator

3. MicroUSB Charge slot – USB cable

supplied.

4. Aux in Jack 3.5mm – Aux in cable

supplied.

5. Volume down – Short press

Skip backward button - Long press.

6. ► Play/Pause – Click to play/pause,

Double Click for SIRI/GOOGLE.Click to

answer/end, Double Click to reject call.

7. – Duo Mode Indicator

8. Volume up – Short press

Skip forward button - Long press.

9. – Microphone

Getting started

Power on/oﬀ

Short press button to power on/oﬀ the

speaker.

The indicator light will  ash.

The speaker has a memory function and

when powered will enter the same mode

as prior to power oﬀ . Each time the speaker

powers on it will reset to 50% volume.

After 10 mins with no activity/connection

the GX-BT60 will automatically power oﬀ

to conserve battery.

Charging

Please use the supplied Micro USB cable to

charge the GX-BT60. A full charge will take

around 3 hours. Please close the port cover

after you have charged the GX-BT60.

The LED at the back will  ash during

charging and remain solid when fully

charged.

The battery level may be seen on the

phone.

Modes

Bluetooth Mode

A. Pairing

Power on the speaker and enter

Bluetooth mode. The light indicator

will  ash. On your smartphone search

Bluetooth devices for the “SHARP

GX-BT60”. Once connected the speaker

will announce it is “connected” and the

indicator light will cease  ashing.

B. Music

► Click to play/pause

Click to increase volume

press and hold for 1.5 seconds to

skip forward a track

Click to decrease volume

press and hold for 1.5 seconds to

skip back a track

C. Calls

► Click to answer an incoming call

► Click to end the active call

► Double click to reject an incoming

call or press and hold

D. SIRI/GOOGLE

► Double click to activate/cancel Siri/

Google voice dialing.

E. Disconnect

► Press and hold for 8 seconds to

disconnect the current Bluetooth

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp GX-BT60 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info