679539
10
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
8
OPTICAL DC INLINE INUSB
HDMI - ARC/CEC
LINE IN
A. Use a RCA to 3.5mm audio cable (not
included) to connect the TV’s audio
output sockets to the LINE IN socket
on the unit.
B. Use a 3.5mm to 3.5mm audio cable
(not included) to connect the TV’s
or external audio device headphone
socket to the LINE IN socket on the
unit.
TIP:
When you use the headphone output on
the TV set, you will be able to adjust the
volume level directly using the TV remote
control.
HDMI - ARC/CEC OPTICAL DC INLINE INUSB
EU
UK
DC IN
Connect to Power
Before connecting the power adapter,
ensure you have completed all other
connections.
Risk of product damage! Only use the
supplied mains adaptor as failure to do
this may result in a safety risk and/or
damage to the unit.
Connect the power adapter to the DC
IN socket of the unit and then into a
mains socket.
Basic Operation
Standby/ON
When you  rst connect the unit to the
main socket, the unit will be in STAND-
BY mode.
Press the
button on the remote cont-
rol to switch the main unit ON or OFF.
Disconnect the main plug from the
main socket if you want to switch the
unit o completely.
When the unit has no input signal for
over 15 minutes, it will automatically
switch to Standby mode.
Select Modes
Press the button on the unit
repeatedly or press the LINE/USB, BT
(Bluetooth), OPT/ARC buttons on the
remote control to select the desired
mode.
Adjust the Volume
Press the + / - buttons on the unit or
on the remote control to adjust the
volume.
If you wish to turn the sound o ,
press the MUTE button on the remote
control. Press the MUTE button again or
press the +/- buttons on the unit or on
the remote control to resume normal
listening.
Select Equaliser (EQ) E ect
While playing, press the EQ button on
the remote control to select between
preset equalisers: Movie (recommen-
ded for viewing movies), Music (recom-
mended for listening to music), News
(recommended for listening to News).
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp HT-SB106 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info