Bedienungsanleitung Sharp LC -42RD2EA (Seite 18 von 40) (Englisch)

559932

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Menu operations

Programme Setup

This section describes how to set up analogue TV

channels manually.

Auto Search

You can automatically search for and download TV

channels by performing the procedure below. This is

the same function as from programme auto search to

preset download in Auto Installation.

1 Repeat steps 1 to 4 in Programme Setup.

2 Press c/d to select “Ye s ”, and then press OK.

1 Programme auto search

2 Auto labelling

3 Auto sorting

4 Preset download

1 Press MENU and the MENU screen displays.

2 Press c/d to select “Setup”.

3 Press a/b to select “Programme Setup”, and

then press OK.

If you have already set the PIN under “Child Lock”,

enter it here.

• See page 17 for setting PIN.

4 Press a/b to select “Auto Search”, “Manual

Adjust”, “Sort” or “Erase Programme”, and then

press OK.

Auto Search

Manual Adjust

Sort

Erase Programme

No Yes

TV only

[

Setup

...

Programme Setup

]

Fine

Colour sys.

Sound sys.

Label

Skip

Decoder

Lock

[179.25]

[AUTO]

[B/G]

[Off]

[SAT.1]

[Off]

179.25 MHz

Manual Adjust

You can set some channel items manually.

1 Repeat steps 1 to 4 in Programme Setup.

2 Press c/d to select “Ye s ”, and then press OK.

3 Press a/b/c/d to select the channel you want

to edit, and then press OK.

• The selected channel information displays.

4 Press a/b to select the desired menu item, and

then press OK.

5 Press a/b/c/d to select or adjust.

NOTE

• When you exit Programme Setup “Manual Adjust” menu,

preset download automatically runs if you change

information on that menu.

Fine

You can adjust the frequency to your desired position.

NOTE

• Adjust while checking the background picture as a

reference.

• Instead of pressing c/d to adjust the frequency in step

5 above, you can set by directly entering the frequency

number of the channel with 0–9.

EXAMPLE

• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.

• 49.25 MHz: Press 4 s 9 s 2 s 5 s OK.

Label

When a TV channel sends its Network Name, the Auto

Installation detects the information and assigns a name

to it. However, you can change individual channel

names.

Colour sys.

Select the optimum colour systems to receive. (AUTO,

PAL, SECAM)

Sound sys. (Broadcasting system)

Select the optimum sound systems (Broadcasting

systems) to receive. (B/G, D/K, I, L, L’)

Skip

Channels with “Skip” set to “On” are passed over when

using Pr/Ps even if selected while watching the

image from the TV.

Decoder

When connecting a decoder to the unit, you need to

select EXT1.

NOTE

• “Off” is factory preset value.

1 Repeat steps 1 to 4 in Manual Adjust.

2 Press a/b/c/d to select each character of the

new name for the channel, and then press OK.

3 Repeat step 2 above until the name is fully spelt

out.

• The name can be 5 characters or less.

• If a channel name is less than 5 characters, select

“END”, then press OK.

LC-42RD2EA_GB_b 07.6.20, 5:37 AM16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC -42RD2EA Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC -42RD2EA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info