Bedienungsanleitung Sharp LC -42RD2EA (Seite 19 von 40) (Englisch)

559932

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

4 Enter the 4-digit number as a PIN using 0 – 9.

5 Enter the same 4-digit number as in step 4 to

confirm.

• “The system PIN has been changed successfully”

displays.

NOTE

• To view a locked channel, you must enter a PIN. (See this

page and page 27 for locking channels from viewing in

analogue TV and DTV mode.) When you select a locked

channel, a PIN prompt message pops up. Press OK to

display the PIN input window.

Resetting the PIN

Allow you to reset your PIN to the factory preset “1234”.

1 Repeat steps 1 to 3 in Changing the PIN.

2 Enter the PIN.

3 Press a/b to select “Reset”, and then press OK.

4 Press c/d to select “Ye s ”, and then press OK.

NOTE

• As a precautionary measure, make a note of your PIN

on the back of this operation manual, cut it out and

keep it in a safe place that children cannot reach.

• See page 32 for resetting the current PIN to the factory

preset “1234” if you lose or forget your PIN.

Menu operations

Lock

You can block the viewing of any channel.

NOTE

• See “Child Lock” for setting PIN.

• When Lock is set to “On” for a channel, “Child lock has

been activated.” displays, and the image and sound of

the channel are blocked.

• When pressing OK while “Child lock has been activated.”

displays, PIN input menu will display. Inputting the correct

PIN lifts the child lock temporarily until the power is turned

off.

Sort

Channel positions can be sorted freely.

1 Repeat steps 1 to 4 in Programme Setup.

2 Press c/d to select “Ye s ”, and then press OK.

3 Press a/b/c/d to select the channel you want

to move, and then press OK.

4 Press a/b/c/d to move it to the desired

position, and then press OK.

5 Repeat steps 3 and 4 until all desired channels

are sorted.

Erase Programme

An individual programme can be erased.

1 Repeat steps 1 to 4 in Programme Setup.

2 Press c/d to select “Yes ”, and then press OK.

3 Press a/b/c/d to select the channel you want

to erase, and then press OK.

• A message screen pops up.

4 Press c/d to select “Ye s”, and then press OK to

erase the selected programme. All the subsequent

programmes move up.

5 Repeat steps 3 and 4 until all desired channels

are erased.

Input Label

You can assign each input source a label you like.

1 Press b to select the desired input source.

2 Press MENU and the MENU screen displays.

3 Press c/d to select “Setup”.

4 Press a/b to select “Input Label”, and then press

OK.

5 Press a/b/c/d to select each character of the

new name for the input source, and then press

OK.

6 Repeat step 5 above until the name is fully spelt

out, and then press OK.

• The name can be 6 characters or less.

• If a label name is less than 6 characters, select

“END”, then press OK.

NOTE

• You cannot change the label if the input source is TV or

DTV.

Child Lock

Allow you to use a PIN to protect certain settings from

being accidentally changed.

Changing the PIN

1 Press MENU and the MENU screen displays.

2 Press c/d to select “Setup”.

3 Press a/b to select “Child Lock”, and then press

OK.

New PIN

–––

Reconfirm

––––

–

Change PIN

Reset

TV only

LC-42RD2EA_GB_b 07.6.20, 5:37 AM17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC -42RD2EA Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC -42RD2EA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info