Bedienungsanleitung Sharp lc 26 sa1 (Seite 22 von 28) (Englisch)

141056

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Teletext function

What is Teletext?

Teletext broadcasts pages of information and

entertainment to specially equipped television sets.

Your TV receives Teletext signals broadcast by a TV

network, and decodes them into graphical format for

viewing. News, weather and sports information, stock

exchange prices and programme previews are among

the many services available.

Turning on and off Teletext

1 Select a TV channel or external input source

providing the Teletext programme.

2 Press m to display the Teletext.

3 Press m again to display the Teletext on the right

screen and normal image on the left screen.

• Each time you press m, the screen switches as

shown below.

• If you select a programme with no Teletext signal,

“No Teletext available.” displays.

• The same message displays during other modes if

no Teletext signal is available.

NOTE

• Teletext will not work if the selected signal type is RGB.

(See page 18.)

TELETEXT

Time display

You can display the time information included in the

Teletext broadcasts.

1 Select a TV channel providing Teletext information.

(The time information is automatically captured.)

2 Press p. The channel display will appear on the

TV.

3 Press p again within the several seconds that

the channel display is on the screen.

Time information will display below the channel

display for several seconds.

4 Even when you change the TV channel, you can

display the time information with steps 2 and 3

above.

NOTE

• The time display cannot be stored once the power is

turned off. When you turn on the power, perform steps 1

to 4 again.

• If acquired successfully, the time information will appear

in the upper-right corner of the screen by pressing MENU.

Still image

You can freeze a motion picture on the screen.

1 Press 3.

2 Press 3 again to exit still image.

NOTE

• When this function is not available, “No still image display

available.” will display.

• The still image automatically goes out after 30 minutes.

Useful features

Description

Increase or decrease the page number.

Select a group or block of pages displayed

in the coloured brackets at the bottom of the

screen by pressing the corresponding

Colour (Red/Green/Yellow/Blue) on the

remote control unit.

Directly select any page from 100 to 899 by

using 0–9.

Switch the Teletext image to Full, Upper half

or Lower half.

Reveal or hide hidden information such as

an answer to a quiz.

Stop updating Teletext pages automatically

or release the hold mode.

Display the subtitle or exit the subtitle

screen.

• Subtitle will not be displayed when the

service does not contain the subtitle

information.

Reveal or hide subpages.

• Red button: Move to the previous subpage.

• Green button: Move to the following subpage.

• These two buttons are shown on the screen

by the signs l and k.

Buttons

P (r/s)

Colour (Red/

Green/Yellow/

Blue)

0–9

f (WIDE

MODE)

k (Reveal

hidden

Teletext)

3 (Freeze/

Hold)

[ (Subtitle

for Teletext)

1 (Subpage)

Button functions

LC-32SA1E_GB_c 06.7.25, 11:36 AM20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp lc 26 sa1 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info