Bedienungsanleitung Sharp LC-32GD7 (Seite 16 von 42) (Englisch)

66383

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Manual station setting

Note: not with DVB-T stations in UK (refer to note on “LCN” on page 13).

You can also search for and store stations manually. However, detailed

knowledge is necessary for manual programming.

Activate the appropriate menu – depending on whether you want to set

TV or radio stations – in the respective mode (TV or Radio) with the

MENU button.

Select “Setup – Channels” in the “TV menu” or “Radio menu”.

Select the entry “Manual tune” and conﬁ rm with OK.

Now enter the necessary setting parameters for each menu item. Press

the INFO button, if you need explanations of the individual menu items.

Notes:

Several radio and TV stations can be broadcast on every channel.

Digital radio stations search

Your receiver can play radio stations via DVB in high quality.

Note: Digital radio stations are not broadcasted in the DVB-T standard in

all regions at present.

Radio stations are stored in a separate station table.

You can search for and store digital radio stations in the “Radio menu”.

Switch to radio mode with the RADIO button.

Scan stations

Radio: 16 Antenne

Previous station

Change sorting

Switch to ...

Select station...

Numerical

EXT1

EXT2

EXT4

AUDIO IN

B5 AKTL

BAYERN 1

BR4 KLSK

SUNSHINE

ROCK ANT

ANTENNE

DLR

DLF

HR-INFO

MDR INFO

MDR FIGA

NDR KULT

SWR1

SWR2

WDR3

WDR5

OESTER 1

MDR JUMP

JAZZ RAD

BLUSAT20

END

BACK

Screen off

Use MENU to call up the “Radio menu” and select “Channels”.

•

Radio menu

Sound

Channels Timer functions

Search wizard

Manual tune

Change stations

Conﬁ rm with OK.

With the “Search wizard” you can have the radio stations searched for

automatically or manually.

In the “Change search settings” menu you can select the signal source

and search for and store “all” digital radio stations or “new ones only”.

You can set the “Search method” to “Channel search” or “Frequency

search” in DVB-T.

In DVB-S you can decide whether you want “Use pre-programming”

and set the “Symbol rate” if necessary.

Finally enter from which station place the found stations are to be

stored.

Press the OK button.

Radio menu -> Channels

Start search

Change search settings

Location of TV set

Signal source

Scope of search

Store stations beginning at ...

Great Britain

Satellite 1: ASTRA 1 (DVB-S)

All stations

Station preset 1 (vacant: 1300)

Search wizard

Your TV set performs the automatic search with the following settings:

END

BACK

Manual tune Change stationsSearch wizard

You now get a summary of the settings you have made.

Select the line “Start search”.

Start the search with OK.

If radio stations have been found and stored you get a station table at the

end.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-32GD7 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info