Bedienungsanleitung Sharp R-890SLM (Seite 7 von 70) (Englisch)

480398

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

INSTALLATION

3. The minimum height

of free space

necessary above

the top surface of

the oven is 19cm.

4. Do not place the

oven where heat, moisture or high humidity are

generated, (for example, near or above a

conventional oven) or near combustible

materials (for example, curtains). Do not block

or obstruct air vent openings. Do not place

objects on top of the oven.

5. Make sure the power supply cord is undamaged

(See “ELECTRICAL CONNECTION” below).

Do not allow the power supply cord

to run over any hot or sharp surfaces,

such as the hot air vent area at the

top rear of the oven.

6. The socket must be readily accessible so that

it can be easily unplugged in an emergency.

7. Do not use the oven outdoors.

BUILDING-IN-KIT.

This oven is designed for counter top or built-in use.

Do not place the oven in a cabinet.

An installation frame is available which enables

the microwave oven to be integrated within a

kitchen unit.

The microwave oven is not designed to be built

above or near a conventional oven.

SHARP recommend the use of the build in kit

EBR-5000, available from your SHARP dealer.

Only the use of this frame will guarantee the

quality and safety of the oven.

ELECTRICAL CONNECTION.

• Do not allow water to come into contact with

the power supply cord or plug.

• Insert the plug properly into the socket.

• Do not connect other appliances to the same

socket using an adaptor plug.

• If the power supply cord is damaged, it must

be replaced by a SHARP approved service

facility or a similarly qualified person to avoid

a hazard.

• When removing the plug from the socket

always grip the plug, never the cord as this

may damage the power supply cord and the

connections inside the plug.

• If the plug fitted to your oven is a rewireable

type and in the event of the socket outlet

in your home not being compatible with the

plug supplied, remove the plug properly

(do not cut off).

• If the plug fitted to your oven is a non-rewirable

type and in the event of the socket outlet in

your home not being compatible with the plug

supplied, cut-off the mains plug.

• Refit with a suitable type, observing the wiring

code given in ‘To replace the mains plug’ on

page 38.

19cm

WARNING: THIS APPLIANCE MUST

BE EARTHED

To wire an appropriate plug, follow the wiring

code given in `To replace the mains plug’ on

page 38.

IMPORTANT!

• The fuse from the cut-off plug should be removed

and the plug disposed of in a safe manner.

• Under no circumstances should the cut-off plug

be inserted into a socket outlet as a serious

electric shock may occur.

• The plug must not be used without the fuse cover

fitted.

• If you have any doubt about your microwave

oven obtain the help of a qualified electrician.

• When replacing the plug please ensure that

you use a BSI or ASTA approved plug to

BS1363, this should be fitted with a brown

coloured 13 amp fuse approved by BSI or

ASTA to BS1362. If you have any doubt

about electrical connection seek the help of a

qualified electrician.

R-890SLM_EN.indd 5R-890SLM_EN.indd 5 2/24/09 4:06:16 PM2/24/09 4:06:16 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp R-890SLM Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info