Bedienungsanleitung Sharp UL-C09EA-W (Seite 8 von 92) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

787872

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Operation of Control Panel

ON/OFF button

Pressing this button turns the air conditioner on and o.

+ / - button

While in the cooling mode, press “+” or “-” button to increase or decrease

set temperature by 1°C. Set temperature range is 16°C to 30°C. When in the

dry or fan mode, these buttons will not operate.

Fan button

Press this button and the fan speed will change as:

low speed >> medium speed >> high speed >> auto fan

Mode button

Press this button and the mode will change as:

COOL >> DRY >> FAN

COOL: Under this mode, cool mode indicator will be on.

Display panel displays set temperature.

Temperature setting range is 16°C ~ 30°C.

DRY: Under this mode, dry mode indicator will be on.

Display panel won’t display.

FAN: Under this mode, only the fan will work. Fan mode indicator will go

on. Display panel won’t display.

Sleep Button

• Press sleep button to enter into sleep mode.

• If the unit is operating in the cooling mode, after sleep mode is started

up, preset temperature will increase by 1°C within 1 hour ;preset

temperature will increase by 2°C within 2 hours and then the unit will

operate at this temperature all the time.

• Sleep function is not available for fan mode or drying mode. If sleep

function is started up, the upper indicator will keep the display status.

• Note that the sleep mode can be operated with the Timer o function.

Timer button

• When setting the timer in the o mode, it will work as an ON timer

function. When setting the timer in the on mode, the timer will work

as an OFF timer. Note that the ON timer and OFF timer cannot be set

together.

• Press the timer button to enter the timer set mode. When in the timer

mode, use the – and + buttons to select the time in 0.5 intervals. When

the display shows 10 hours, the + and - buttons will set in 1 hour

intervals. After setting duration time, press timer button again to conrm

the setting.

• When ON timer is set, the unit will start operating when the time set has

elapsed. When OFF timer is set, after setting the timer, the timer display

will be replaced with the temperature after ve seconds.

• To cancel the timer, press the timer button again.

Opening the louver

• Press the lower louver where it is marked with the word "PUSH". This will

open the guide louver. Do this before using the unit.

• In order to allow maximum air ow, it is suggested to open the air guide

louver to the maximum position.

Remote control

Remote control buttons

Refer to the pictures 4 on page 1.

1. ON/OFF

2. MODE

3. +/-

4. FAN

5. X–FAN

6. SLEEP

7. TIMER

Remote control display

Refer to the pictures 5 on page 1.

1. COOL – Cool mode

2. DRY – Dry mode

3. FAN – Fan mode

4. T-ON – Timer on

5. T-OFF – Timer o

6. X–FAN – X-Fan operation

7. SLEEP – Sleep operation

8. LOCK – Lock

9. SPEED – Set fan speed

10. Set temperature

11. Set time

12. Send signal

Remote control functions

NOTE:

 The remote control may have more functionality than your air

conditioner has. If any additional buttons are pressed, they will have no

aect on the operation of the unit.

 When power is connected (stand by condition), you can operate the air

conditioner through the remote control.

 When unit is on, each time you press the button on remote control, the

signal icon " " on the display of remote control will blink once. If the

air conditioner emits a sound, it means the signal has been sent.

 When unit is o, set temperature will be displayed on the remote control

(If the light of indoor unit display is turned on, the corresponding icon

will be displayed). When unit is on, the icons of the ongoing functions

will be displayed on the remote control.

ON/OFF button

Press this button to turn unit ON/OFF.

MODE button

Pressing this button once can select your required mode as shown below.

(the corresponding icon " " will be lit up after the mode is selected):

COOL >> DRY >> FAN

• When selecting COOL, air conditioner will operate under cooling mode.

Then press + or - button to adjust set temperature. Press FAN button to

adjust fan speed.

• When selecting DRY, air conditioner will operate at low fan speed under

dry mode. In dry mode, fan speed can't be adjusted.

• When selecting FAN, air conditioner will operate in fan mode only. Then

press FAN button to adjust fan speed.

+/- button

• Pressing + or - button once will increase or decrease set temperature

by 1°C. Hold + or - button for 2 seconds, set temperature on remote

controller will change quickly. Release the button after your required

set temperature is reached. (Temperature can't be adjusted under auto

mode)

• When setting Timer On or Timer O, press + or - button to adjust the

time. (See TIMER Button for setting details)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp UL-C09EA-W Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info