Bedienungsanleitung Sharp XL-B517D (Seite 6 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

787617

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

29. LOUD: Press to increase the level of bass at low volume levels.

30. NUMBER (0-9): Use to select songs, presets or enter frequency.

31. SAVE: Press to save your favourite stations.

Fitting or replacing the remote control batteries

1. To open the battery compartment, push your thumb down on to

the circle on the battery compartment cover and slide it down.

2. Fit two AAA batteries observing polarity +/- as shown. When

replacing the batteries, use only the same type of battery supplied.

3. Re- t the battery cover and clip it in place.

Preparation for use

AUX IN

AUDIO IN

Place a speaker on either side of the main unit, preferably at the same

height and with at least 150mm space between each speaker to the

main unit.

Connect the speaker plugs to the rear of the unit. Take care to match

the speaker placed to the LEFT to the LEFT output on the rear of the

unit. Repeat for the RIGHT speaker.

2. Please ensure that the voltage marked on the rating label,

located on the rear panel, is the same as the voltage in your area.

Insert the power lead in to the AC IN socket on the back of the

unit. Plug the other end of the cable in to the wall socket.

3. Press the STANDBY button on the main unit to turn it ON.

Extend the ANTENNA to get the best reception. Press the

button on the unit, or DAB/FM button on the remote

control to enter the DAB/FM mode. To use the radio in

DAB/FM mode, follow the instructions in the FM or DAB

RADIO OPERATION chapter of the User Manual.

4. Press the button on the unit, or CD button on the remote

control to enter the CD mode. Press the button to open

the disc drawer and insert a disc. Press the button again

to close. The CD will begin playing from the  rst track.

5. Press the button on the unit, or AUX button on the

remote control to enter the Aux In (Audio) mode. Connect

your audio device to the AUX IN socket via a 3.5mm aux in

cable. Control playback via your connected audio device.

6. Press the button on the unit, or button on the remote

control button to enter the Bluetooth mode. Activate the

Bluetooth enabled device and select the “SHARP XL-B517D”.

Select the song you want and press to play.

7. Press the button on the unit, or USB button on the remote control

to enter the USB mode. Plug the USB device to USB port on the front

panel of the unit, and it will read the USB and play automatically.

BASIC FUNCTIONS

Setting the time/date

1. To set the time/date manually, long press the MENU

button when the unit is in standby. Use the / keys

to change the values and press to con rm.

2. To set the time/date automatically, press the MENU button when the

unit is on. Select the SYSTEM menu and press to con rm. Select

TIME from the SYSTEM menu and then AUTO UPDATE where you

will be able to select the source of the update. Press MENU to exit.

Switching modes

To switch between the modes: DAB+, FM, CD, Bluetooth, USB and AUX IN,

press SOURCE button on the unit or the corresponding button (DAB/FM,

CD, , AUX/USB) on the remote control.

Volume control

1. Increase: Rotate the VOLUME control on the main unit

clockwise or press the VOL+ button on the remote.

2. Decrease: Rotate the VOLUME control on the main unit

anti-clockwise or press the VOL- button on the remote.

EQ eﬀ ects

Press the EQ button on the remote repeatedly to cycle through a set of

equaliser presets to adjust the sound. Choose from CLASSIC, ROCK, POP,

JAZZ, DANCE, LIVE and O .

Loudness function

This function will increase the level of bass at low volume levels. Press the

LOUD button on remote to enable the e ect. Press again to disable the

e ect.

Mute function

Press the button at any time to mute the sound output. Press again to

unmute.

Tone controls

To adjust the bass, use the BAS+ or BAS- buttons on the remote control.

To adjust the treble, use the TRE+ or TRE- buttons on the remote control.

Standby mode

Press the STANDBY button on the unit or the remote to put the system

into standby mode. To resume normal operation, press this button again.

NOTE: This unit is designed to enter STANDBY mode automatically, after about

15 minutes (approximately) of inactivity. Press STANDBY button to wake the

unit.

NOTE: When you power on the unit from standby, it will resume in the mode

that was last used.

FM radio operation

1. Press the source button on the unit, or

DAB/FM button on the remote control twice to enter

FM mode. (FM frequency: 87.50-108.00MHz)

2. Press the /buttons on remote control to decrease

or increase the frequency in 0.05MHz increments.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp XL-B517D Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info