Bedienungsanleitung Sharp XL-B517D (Seite 8 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

787617

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

 To begin the programmed order, press the button.

 To cancel the program sequence, press the button twice.

Notes:

MP3  les are supported.

Unsupported  le formats are skipped. For example, Word documents

(.doc) or MP3  les with extension .dlf are ignored and not played.

Bluetooth Operation

The Micro system has Bluetooth capability and is able to receive a signal

within a range of 7 metres. To pair the Micro system with a Bluetooth

device:

1. Press the source button on the unit, or button

on the remote control to enter Bluetooth mode. The

unit will display "Bluetooth Not Connected".

2. Activate your Bluetooth device and select the search mode.

3. Select “SHARP XL-B517D” from the search list and connect.

4. Enter “0000“ for password if prompted.

5. When the devices are connected to each other, a con rmation sound

will be made and the display will show "Bluetooth Connected".

6. You can now playback music from your device. Please

note that the volume on the Bluetooth source device

operates independently to the volume of the unit.

7. To turn o the Bluetooth function: switch to another function

on the Micro system, disable the function on your Bluetooth

source device; or press the button on the remote control.

Connect other audio devices

Audio (AUX IN) allows your unit quickly and easily to connect to an MP3

player or other external sources.

1. Use a 3.5mm audio cable to connect your external audio

device to the AUX IN socket on the front panel.

2. Press the source button on the unit, or AUX/USB button

on the remote control to switch to the AUX IN mode.

3. You may need to operate the external audio

device directly for playback features.

4. Please note that the volume on the Audio source device

operates independently to the volume of the unit.

USB Operation

It is possible to listen to music stored on a USB  ash drive via the USB

device interface of the unit.

Connecting a USB  ash drive:

1. Switch the unit on and select USB mode by pressing the SOURCE

button or pressing the AUX/USB button on the remote control twice.

2. Connect the USB  ash drive to the USB device interface on the front

panel of the unit.

3. The unit will now play songs which are saved on the USB device.

Notes:

MP3  les are supported.

Unsupported  le formats are skipped. For example, Word documents

(.doc) or MP3  les with extension .dlf are ignored and not played

Even when the  les are in a supported format (MP3), some

may not play or display depending on the compatibility.

In some cases, reading may be as long as 60

seconds, this is not a malfunction.

Depending on the amount of data and media speed, it

may take longer for the unit to read the USB device.

The maximum USB memory size is 32GB.

USB memory device must be formatted in FAT, FAT16 or FAT32

Troubleshooting

No Power

Reason

• Power cable not connected to wall socket

• Power socket is not switched on

Solution

• Make sure the plug is connected

• Switch the power on

No Sound from AUX/Bluetooth input

Reason

• Volume is too low

• AUX/Bluetooth source volume is too low

Solution

• Increase the volume

• Increase the output volume of the AUX/Bluetooth source

Sound is distorted from AUX Input

Reason

• Volume is too high

• AUX source volume is too high

Solution

• Reduce the volume

• Reduce the output volume of the AUX source

Unable to play CD

Reason

• No disc in the tray

• Disc not loaded properly

• Disc is dirty

Solution

• Insert a compatible disc

• Check the disc loaded correctly

• Clean the disc

Static Sound

Reason

• Poor reception

Solution

• Re-locate the antenna

Desired station not found

Reason

• Weak signal

• Station not available in your area

Solution

• Use the manual tune function

• See DAB availability website

Weak or no DAB signal

Reason

• DAB not available in your area

Solution

• See DAB availability website

I can hear a burbling noise on some stations

Station Name with question mark: ?Station Name (e.g ?BBC

RADIO 4)

Reason

• Weak DAB signal or DAB station not broadcasting

Solution

• Try re-positioning the aerial

Unit switches oﬀ after 15 minutes of inactivity

Reason

• Auto standby mode in operation

Solution

• This unit is designed to enter STANDBY mode automatically after 15

minutes of inactivity. Press the STANDBY button to wake up the unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp XL-B517D Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info