Bedienungsanleitung Sharp XL-BB20D (Seite 11 von 136) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

679563

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

EN-10

■ Listening to the sound

Check that:

● The source device Bluetooth functionality is ON.

● Pairing of this unit and the source device is completed.

● Unit is in connected mode.

1 Press the (ON/STANDBY) button to turn the power on.

2 Press the button on the main unit or BLUETOOTH button

on the remote control to select Bluetooth function.

3 Start the Bluetooth connection from the Bluetooth audio source

device.

4 Press the BLUETOOTH / button.

Notes:

● If the source device has an extra bass function or equalizer

function, set them to off to avoid sound distortion.

Notes:

● Make the Bluetooth connection again if the source device is not

turned on, or its Bluetooth functionality is off or is in sleep mode.

● The volume of this unit may not be controlled as intended de-

pending on the device.

Bluetooth operation buttons

Main unit Remote

control

Operation

Press the button to play or

pause.

Press the button to skip to next

track.

Press and hold to fast forward.

Press the button to skip to

previous track.

Press and hold to fast reverse.

■ To disconnect the Bluetooth device

Perform any of the followings.

– Press PAIRING button until “Disconnected” appears on the display.

– Disconnect or turn off the Bluetooth connection on the audio source

device. Refer the operating manual supplied with the device.

– Turn off this unit.

■ Auto power on

During Bluetooth standby mode, the unit will automatically

power on when the Bluetooth connection is set up between

the main unit and your device.

Note:

This function is not applicable during Bluetooth standby

mode off.

■ Link to Bluetooth headphone

You can connect a set of Bluetooth headphones to this unit.

Before making the connection, check that:

● The Bluetooth headphone to be connected is in pairing

mode and within range.

1 Select a desired function to listen to, except for Blue-

tooth function.

2 Press and hold the HEADPHONE LINK button on the

remote control until “Headphone Link” appears on the

display.

3 Press ENTER button. “Searching” appears on the dis-

play.

4 After nish searching, the nearby devices’ names will

be shown on the display. Press or to select the

desired device and then press ENTER button. “Con-

nected” appears on the display and Headphone Link

LED (green) lights up.

● If your device does not appear on the list, do the

following:

- Make sure the Bluetooth headphone is still in

pairing mode. Refer to the manual supplied with

it.

- Press

button.

- Repeat steps 2 - 4.

Notes:

● Connection to Bluetooth headphone is valid in all

function except Bluetooth.

● Bluetooth headphone connection will be terminated in

Bluetooth function.

● When connected with Headphone Link, speaker

output is muted.

● Volume can be controlled on both main unit and the

connected Bluetooth headphone separately.

To disconnect the Bluetooth headphone:

Turn off the Bluetooth mode on the connected Bluetooth

headphone. Refer to the manual supplied with it.

“Disconnected” appears and Headphone Link LED (green)

lights off.

To re-link with the previous headphone device:

The device must be in pairing mode and within range.

1 Press the HEADPHONE LINK button. “Headphone

Link” will be blinking depending on the last connection.

2 Within 5 seconds press the ENTER button. “Linking”

will be displayed. “Connected” appears if re-link pro-

cess is successful.

Note:

If “Not found” appears, repeat from step 1. Make sure that

the device to be connected is within range and in pairing

mode.

Listening to Bluetooth enabled devices (continued)

XL-BB20D_OM_EN_DE_ES_FR_IT_PL.indb 10 2018-01-25 10:09:52

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp XL-BB20D Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp XL-BB20D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info