Bedienungsanleitung Sharp XL-BB20D (Seite 13 von 136) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

679563

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

EN-12

Listening to a CD or MP3 disc (continued)

■ Repeat play

Repeat play can play one track, all tracks or a programmed se-

quence continuously.

To repeat one track:

Select desired track using the or

button.

Press the PLAY MODE button repeatedly until “Repeat One” ap-

pears. Press the / (CD / ) button.

To repeat all tracks:

Press the PLAY MODE button repeatedly until “Repeat All” ap-

pears. Press the / (CD / ) button.

To repeat desired tracks:

Perform steps 1 - 5 in “Programmed play” section on this page

and then press the PLAY MODE button repeatedly until “Memory

Repeat” appears.

To repeat one folder:

While in Folder mode on (MP3), press PRESET ( or ) to se-

lect desired folder. Press PLAY MODE button repeatedly until

“Repeat Folder” appears. Press the / (CD / ) button.

To cancel repeat play:

Press the PLAY MODE button repeatedly until “Normal” appears

and “ ” disappears.

Caution:

After performing repeat play, be sure to press the

button.

Otherwise, the disc will play continuously.

■ Programmed play (CD)

While in the stop mode, press the MEMORY button

on the remote control to enter the programming save

mode.

2 Press the or button to select the de-

sired track.

Selected track number

3 Press the MEMORY button to save the track number.

4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be

programmed. If you want to check the programmed tracks,

during stop mode, press the MEMORY button repeatedly.

To clear the programmed tracks, press the CLEAR button.

5 Press the / (CD / ) button to start playback.

■ Programmed play (MP3)

While in the stop mode, press the MEMORY button to

enter the programming save mode.

2 Press the PRESET ( or ) button on the remote con-

trol to select the desired folder.

Then press the or button (remote con-

trol) to select the desired tracks.

3 Press the MEMORY button to save the folder and track

number.

4 Repeat steps 2 – 3 for other folder/tracks. Up to 32

tracks can be programmed.

5 Press the / (CD / ) button to start playback.

To cancel the programmed play mode:

During programmed stop mode, press the

button. The

display will show “Memory Clear” and all the programmed

contents will be cleared.

Adding tracks to the programme:

If a programme has been previously stored, the “MEM”

indicator will be displayed. During stop mode, press the

MEMORY button once. Within 10 seconds, press and hold

the MEMORY button again. Then follow steps 2 - 3 to add

tracks.

Notes:

● When the disc compartment is opened, the pro-

gramme is automatically cancelled.

● If you press the

(ON/STANDBY)

button to enter the

standby mode or change the function from CD to an-

other, the programmed selections will be cleared.

■ Procedure to playback MP3 disc with

folder mode on

To play back CD-R/RW.

1 In CD function, load an MP3 disc. Press the FOLDER

button and disc info will be displayed.

MP3 indicator

Total number of les

TOTAL indicator

Total number of folder

2 Press the PRESET ( or ) button to select desired

playback folder. (Folder mode on)

FOLDER

indicator

FOLDER number First track number in

the folder

3 Select desired le to be played back by pressing the

or button.

4 Press the / (CD / ) button. Playback will start and

le name will be displayed.

● Title, Artist and Album name are displayed if they

are recorded on the disc.

● In case of playback with the folder mode on, press

the PRESET (

or ) button, and the folder can

be selected even though it is in playback/pause

mode. It will continue playback/pause mode in the

1st track of the selected folder.

● Display content can be changed by pressing the

DISPLAY button.

Title displayCounter display

Album display

Folder displayFile name display

Artist display

Note:

If “Not Supported” is displayed, it means “Not supported

playback le” is selected.

XL-BB20D_OM_EN_DE_ES_FR_IT_PL.indb 12 2018-01-25 10:09:54

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp XL-BB20D Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp XL-BB20D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info