Bedienungsanleitung Sharp XL-HF151PHS (Seite 25 von 35) (Englisch)

480430

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

11/5/12 10_HF151PH_EN.fm

E-14 10

Advanced USB playback

The following functions are the same as CD

operations:

Page

Direct track search. . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Programmed play (MP3/WMA) . . . . . . . . . . . . . . . . . .11

Note:

If USB memory device is not connected, “USB No Media”

will be shown on the display.

Notes:

●This unit only supports “MPEG-1 Audio Layer-3”

format. (Sampling Frequency is 32, 44.1, 48kHz)

●Playback order for MP3 files may differ depending on

the writing software used during file download.

●Bitrate which is supported by MP3 is 32~320 kbps,

WMA is 64~160 kbps.

●For MP3/WMA files, please put “.MP3” “.WMA”

extension. Files cannot be played back if there is no

MP3/WMA extension.

●Playlists are not supported on this unit.

●This unit can display Folder Name or File Name up to

32 characters.

●Maximum total number of MP3/WMA files is 999.

●Total number of folders read is 99 including folder with

non-playable file. However, the display shows only

folder with MP3 files.

●The display playback time may not be displayed

correctly when playing back a variable bitrate file.

●The ID3TAG information supported are TITLE, ARTIST

and ALBUM only. Title name, artist name and album

name can be displayed by pressing the DISPLAY

button during file playback or pause mode.

●WMA meta tag also supports title, artist and album

name which are recorded in WMA files. Copyright

protected WMA files cannot be played back.

Listening to the radio

Notes:

●When radio interference occurs, auto scan tuning may

stop automatically at that point.

●Auto scan tuning will skip weak signal stations.

●To stop the auto tuning, press the TUNING

( or )

button again.

●When an RDS (Radio Data System) station is tuned in,

the frequency will be displayed first, and then the RDS

indicator will light up. Finally, the station name will

appear.

●Full auto tuning can be achieved for RDS stations

“ASPM”, see page 16.

To receive an FM stereo transmission:

●Press the TUNER button to select stereo mode and

“ST” indicator will be displayed. “ ” and “ ” will

appear when an FM broadcast is in stereo.

●If the FM reception is weak, press the TUNER button to

extinguish the “ST” indicator. The reception changes to

monaural, and the sound becomes clearer.

■Tuning

1Press the ON/STAND-BY button to turn the power on.

2Press the TUNER button repeatedly to select FM Stereo

or FM Mono.

3Press the TUNING

( or )

button on the remote

control to tune in to the desired station.

●Manual tuning:

Press the TUNING

( or )

button repeatedly to

tune in to the desired station.

●Auto tuning:

When the TUNING

( or )

button is pressed for

more than 0.5 seconds, scanning will start

automatically and the tuner will stop at the first

receivable broadcast station.

CD/USB

RDS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp XL-HF151PHS Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp XL-HF151PHS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info