Bedienungsanleitung Sharp XL-HF151PHS (Seite 26 von 35) (Englisch)

480430

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

11/5/12 10_HF151PH_EN.fm

E-15

Listening to the radio (continued)

You can store 40 FM stations in memory and recall them

at the push of a button. (Preset tuning)

Note:

The backup function protects the memorised stations for a

few hours should there be a power failure or the AC power

lead become disconnected.

1Press the PRESET

( or )

button for less than 0.5

seconds to select the desired station.

The stations saved in the memory can be scanned

automatically. (Preset memory scan)

Using the Radio Data System (RDS)

RDS is a broadcasting service which a growing

number of FM stations provide. These FM stations

send additional signals along with their regular

programme signals. They send their station names,

and information about the type of programme such as

sport, music, etc.

When tuned to an RDS station, “RDS” and the station

name will be displayed.

“TP” (Traffic Programme) will appear on the display when

the received broadcast carries traffic information, and “TA”

(Traffic Announcement) will appear whilst a traffic

information is on air.

“PTYI” (Dynamic PTY Indicator) will appear whilst the

Dynamic PTY station is received.

You can control the RDS by using the buttons on the

remote control only.

Each time the RDS DISPLAY button is pressed, the

display will switch as follows:

■Memorising a station

1Perform steps 1 - 3 in “Tuning”.

2Press the MEMORY button.

3Within 30 seconds, press the PRESET

( or )

button

to select the preset channel number. Store the stations

in memory, in order, starting with preset channel 1.

4Within 30 seconds, press the MEMORY button to store

that station in memory. If the “MEMORY” and preset

number indicators disappear before the station is

memorised, repeat the operation from step 2.

5Repeat steps 1 - 4 to set other stations, or to change a

preset station. When a new station is stored in the

memory, the station previously memorised for that

preset channel number will be erased.

■To recall a memorised station

■To scan the preset stations

1Press the PRESET

( or )

button for more than 0.5

seconds. The preset number will flash and the

programmed stations will be tuned in sequentially, for 5

seconds each.

2Press the PRESET

( or )

button again when the

desired station is located.

■To erase entire preset memory

1Press the TUNER button on remote control or press the

FUNCTION button on main unit repeatedly to select

Tuner function.

2In Tuner function, press the CLEAR button until “Tuner

Clear” appears.

■Information provided by RDS

When tuning in to a station other than an RDS station or

to an RDS station which sends weak signal, the display

will change in the following order:

CD/USB

RDS

Station name (PS) Programme type (PTY)

Frequency Radio text (RT)

No PS No PTY

FM 98.80 MHz No RT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp XL-HF151PHS Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp XL-HF151PHS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info