CONTROLS AND OPERATION
5
1. Turn the (On/Off Switch) clockwise to turn on the
power, the speed indicator and the strobe-
illuminator, which is located beneath the On/Off
switch, will light up.
2. Place a record on the slip mat. When playing a 45-
rpm record with a large center hole, place the 45-
rpm adapter on the center spindle.
3. Set the speed to match the record.
4. Remove the stylus protector from the Headshell
Stylus, release the Tonearm clamp.
5. Set the cueing lever to the up position.
6. Press the Start/Stop Button, the turntable platter
will start to rotate.
7. Move the tonearm over he desired groove.
8. Set the cueing lever to the down position, the
tonearm will descend slowly onto the record and
begin playing.
9. When play is finished, raise the cueing lever, move
the tonearm onto the Tonearm clamp.
10. Press the Start/Stop Button to stop the platter
from rotating. Turn the On/Off Switch
counterclockwise to turn off the power.
SUSPEND PLAY
Set the cueing lever to “UP” position during play, the
stylus tip of the cartridge will be lifted from the record.
