Bedienungsanleitung Sherwood Wisdom 3 (Seite 13 von 54) (Englisch)

618049

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Wisdom 3 DC Manual

PSI

TIME

NITROX

SURFACE

PSI

TIME

NITROX

SURFACE

PSI

TIME

NITROX

SURFACE

PSI

TIME

NITROX

SURFACE

PSI

BAR

FEET

TIME

-STOP

DIVE

FEET

METERS

MAXIMUM

DESAT

TOTAL ASCENT

NITROX

AIR

GAUGE

CNS

DECO

FO2%

SAFE

MINUTES

METERS

SURFACE



ACTIVATION

PUSH BUTTON (PRIMARY METHOD)

A momentary press of the front (Advance) button activates the Wisdom 3.

The Wisdom 3 will automatically turn OFF 2 hours after activation if no dive is made. If the water activation

contacts are still bridged (the unit is wet), it automatically reactivates.

WATER CONTACT (BACKUP METHOD)

NOTE: This method functions only when the Wet Activation feature is set ON.

The Wisdom 3 has 2 contacts that cause it to activate when the space between the contacts is bridged by a

conductive material (e.g., water contact) and enter WET Mode (Fig. 9A) or DIVE Mode.

Upon removing the bridge between the contacts (drying the unit), the alpha graphic TIME replaces the graph-

ic WET (Fig. 9B).

If the contacts are still bridged 2 hours after a dive, the alpha graphic WET appears together with the graphic

FLY:SAT and the Time to Fly and Desaturation countdown timers.

Upon drying the unit, the graphic WET is replaced with the graphic TIME.

DIAGNOSTIC MODE (ONLY IF MANUALLY ACTIVATED)

Immediately following manual (push button) activation, the Wisdom 3 lights all segments of the LCD and

initiates a countdown sequence (Fig. 10). Following the countdown sequence (from 8, -, 9, 8, 7, 6, 5, 4, 3, 2,

1, 0) which takes about 2 seconds, it veries that sensor readings and battery voltage are within tolerance. If

values are satisfactory, it enters Surface Mode displaying the TIME screen.

When the front (Advance) button is held depressed and as the Diagnostic countdown reaches 00, a Serial

Number screen appears displaying the unit’s Serial Number and rmware code Revision Number as long as

the button is held depressed (Fig. 11). Upon releasing the button, the unit shuts Off.

Once the dive computer is activated, regardless of what mode it is in, it automatically reverts to DIVE MODE

upon descent to 5 FT (1.5 M).

SURFACE SCREENS

TIME SCREEN

The TIME screen appears immediately following diagnostics (if manually activated) on a new day, or re-

activation in FLY/DESAT MODE.

If the unit is wet, the alpha graphic WET replaces the alpha graphic TIME. Once the unit is dry, the WET

graphic is replaced by the TIME graphic.

The graphic TIME (or WET) ashes during the rst 10 minutes after a dive.

TIME/WET SCREENS (Fig. 12/13)

Appearing on the display are -

• Alpha graphic TIME, or WET

• Date (month and day)

• Elapsed surface time (or time since activation if no dive made yet that day) and graphic Surface

• Operating Mode graphic (Nitrox, Air, or Gauge)

• Time of Day (hours:minutes )

• Cylinder Pressure and graphic (PSI or BAR)

• NiBG and O2BG, if any

• Battery icon (if Low Battery Condition)

Pressing the Both buttons simultaneously for less than 2 seconds activates the Backlight.

Pressing the front (Advance) button accesses the DATA screen.

Fig. 10 - Diagnostics

Fig. 11 - Serial No.

Fig. 12 - Time

Fig. 13 - Wet

Fig. 9A - Unit Wet

Fig. 9B - Unit Dry

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sherwood Wisdom 3 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info