Bedienungsanleitung Sherwood Wisdom 3 (Seite 16 von 54) (Englisch)

618049

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Wisdom 3 DC Manual

PSI

FEET

TIME

NITROX

MINUTES

While viewing a PLAN screen -

• Pressing Both buttons for < 2 seconds activates the Backlight.

• Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.

• Pressing the front (Advance) button accesses the LAST screen.

The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.

LAST DIVE SCREEN

The LAST screen, which displays data for the most recent dive, is accessed by pressing the front (Advance)

button 3 times while the TIME/WET screen is being displayed (TIME/WET > DATA > PLAN > LAST).

LAST (DIVE) screen (Fig. 19)

• Alpha graphic LAST

• Time of Day the dive Started

• Time of Day the dive Ended

• Operating mode graphic (Air, Nitrox, or Gauge)

• Maximum Depth and graphic (Feet or Meters)

• Elapsed Dive Time and graphic (Minutes)

• Cylinder Pressure (end of dive) and graphic (PSI or BAR)

• N2 Bar Graph reecting segments at end of dive and maximum segment (except Gauge)

• O2 Bar Graph reecting segments at end of dive (if Nitrox)

While viewing the LAST screen -

• Pressing Both buttons for < 2 seconds activates the Backlight.

• Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.

• Depressing the front (Advance) button accesses the LOG GO TO screen.

The unit reverts to the TIME screen if neither button is pressed in 2 minutes.

LOG MODE

The Log stores data for each dive as 3 screens referred to as the Date Screen, Screen #1, and Screen #2.

Upon gaining access to the Date Screen, Log Screen #1, and Log Screen #2, information displayed is frozen

until either button is pressed again. If neither button is pressed, the unit reverts to the TIME screen in 2 min-

utes.

The LOG stores information from the latest 50 dives which can be accessed sequentially from the most recent

to the oldest, and retains the information indenitely, even if the Battery is removed. Log information is de-

leted when the unit is manually Reset (cleared).

After exceeding 50 dives, the LOG stores the most recent dive while deleting the oldest.

Dives are numbered 1 to 50 for each Activation Period.

• During 10 minutes after a dive, pressing the front (Advance) button 1 time accesses the Log Mode.

• 10 minutes after a Non-Violation Dive, pressing the front (Advance) button 4 times accesses Log

Mode. (TIME > DATA > PLAN > LAST > LOG).

• 10 minutes after a Violation Dive, pressing the front (Advance) button 3 times accesses Log Mode.

(TIME > DATA > LAST > LOG). PLAN is not available after a Violation Dive.

• Entering Log Mode displays the LOG GO TO screen.

LOG GO TO screen (Fig. 20)

• Alpha graphic LOG

• Alpha graphic Go to -

While viewing the LOG GO TO screen -

• Pressing Both buttons for < 2 seconds activates the Backlight.

• Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.

• Pressing the front (Advance) button bypasses Log Mode and accesses the HISTORY screen.

The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.

Fig. 19 - Last Dive

Fig. 20 - Log Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sherwood Wisdom 3 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info