Bedienungsanleitung Showtec Atmos 1000 (Seite 6 von 12) (Englisch)

810416

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

 The residence time of persons in smoke-filled rooms with less than 15 m of sight must never exceed

5 minutes.

 The fog vapour at point of release is under pressure and is extremely hot.

 The output nozzle becomes very hot during operation (300 degrees C). Keep flammable

materials at least 50 cm away from the nozzle.

 The use of smoke-fluid is only allowed for adults.

 Repairs, servicing and electric connection must be carried out by a qualified technician.

 In dense, smoke-saturated surroundings, the oxygen portion is substantially reduced!

 The smoke density must be portioned in a way that the sight will always be above 5 m - Danger of

anxiety state due to missing orientation!

 The user is responsible for correct positioning and operating of the Atmos 1000. The manufacturer

will not accept liability for damages caused by the misuse or incorrect installation of this device.

 Every smoke-filled room must be overseen by a skilled person.

 WARRANTY: Till one year after date of purchase.

Operating instructions:

This device is not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

The minimum distance between light-output and the illuminated surface must be more than 0,5 meters.

The maximum ambient temperature ta = 45°C must never be exceeded.

The relative humidity must not exceed 50 % with an ambient temperature of 45° C.

If this device is operated in any other way, than the one described in this manual, the product may suffer

damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, explosion, crash etc.

You endanger your own safety and the safety of others

Improper installation can cause serious damage to people and property !

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other

safety issues.

Do not attempt the installation yourself !

Always let the installation be carried out by an authorized dealer !

Procedure:

 If the fogger is lowered from the ceiling or high joists, professional trussing systems have to be

used.

 Use a clamp to mount the fogger, with the mounting-bracket, to the trussing system.

 The fogger must never be fixed swinging freely in the room.

 The installation must always be secured with a safety attachment, e.g. an appropriate safety net

or safety-cable.

 When rigging, derigging or servicing the fogger, always make sure, that the area below the

installation place is blocked and staying in the area is forbidden.

The Atmos Fogger can be placed on a flat stage floor or mounted to any kind of truss by a clamp.

Improper installation can cause serious damage to people and property !

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Showtec Atmos 1000 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Showtec Atmos 1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info