Bedienungsanleitung Siemens EA645GMA1E (Seite 5 von 8) (Englisch)

790990

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Getting to know your appliance en

*Getting to know your

appliance

Get t i ng to know your appl i ance

The instruction manual is the same for various different

hobs. You can find the hob dimensions in the overview

of models. ~ Page 2

The hotplates

Notes

■Any dark areas in the glow pattern of the hotplate

are due to technical reasons. The function of the

hotplate is not affected.

■Hotplate temperature is regulated by the heat

switching on and off.The heat may also switch on

and off at the highest setting.

This ensures e.g.:

– sensitive components are protected from

overheating

– the appliance is protected from electrical

overload

– better cooking results are achieved

■With multi-circuit hotplates the heater elements of the

inner filament circuits and the heater element of the

activations may switch on and off at different times.

Combination cooking zone

The single-circuit hotplates can be operated without the

bridge heating element independently of each other or

combined with the bridge heating element as described

in the table.

The small extended cooking zone (1 +3) and the single-

circuit hotplate (2) can also be operated independently

of one another using different heat settings. Different

temperature ranges are therefore generated on the

large roaster, the Teppanyaki or the grill plate, for

example. The small extended cooking zone can then be

used to fry a meal and the single-circuit hotplate

simultaneously used to keep a meal warm.

Note: Suitable cookware is available from the after-

sales service or our e-Shop.

Hotplate and residual heat indicators

The hotplate and residual heat indicators light up when

a hotplate is warm:

■Hotplate indicator - during operation, shortly after

you have switched on a hotplate.

■Residual heat indicator - after cooking, when the

hotplate is still warm.

You can use the residual heat to save energy, e.g. to

keep a small dish warm or to melt chocolate.

Hotplate Activating and deactivating

$Single-circuit

hotplate

ðDual-circuit

hotplate

Activation: Turn hotplate switch to the right as far

as ð. Setting the heat setting. Switching off:

Turn the hotplate switch to 0 and reset. Never

turn the hotplate switch past the symbol ð to 0.

1 = single-circuit hotplate

2 = single-circuit hotplate

3 = bridge heating element







Combination Activation Suitable for

Small extended

cooking zone:

Combination of 1

+ 3

Turn the hotplate switch to

the right until æ. Setting

the heat setting.

Switching off: Turn the hot-

plate switch to 0 and reset.

Never turn the hotplate

switch past the symbol æ

to 0.

Small roaster

Small Teppanyaki.

Large extended

cooking zone:

Combination of 1

+ 3 + 2

Set the small extended

cooking zone. Set the front

left hotplate using the same

heat setting.*

Large roaster

Large Teppanyaki

Large grill plate

* For even heat distribution, you may have to slightly vary the heat

setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EA645GMA1E Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EA645GMA1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info