Bedienungsanleitung Siemens EH 375ME11E (Seite 5 von 12) (Englisch)

71956

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Absence of pan or unsuitable size

If no pan is placed on the selected hotplate, or if it is made of

unsuitable material or is not the correct size, the power level

displayed on the hotplate indicator will flash. Place a suitable

pan on the hotplate to stop the flashing. If this takes more than

90 seconds, the hotplate will switch off automatically.

Empty pans or those with a thin base

Do not heat empty pans, nor use pans with a thin base. The

hob is equipped with an internal safety system. However, an

empty pan may heat up so quickly that the "automatic switch

off" function may not have time to react and the pan may reach

very high temperatures. The base of the pan could melt and

damage the glass on the hob. In this case, do not touch the

pan and switch the hotplate off. If it fails to work after it has

cooled down, please contact the Technical Assistance Service.

Pan detection

Each hotplate has a minimum limit for detecting pans, which

varies depending on the material of the pan being used. You

should therefore use the hotplate that is most suitable for the

diameter of your pan.

Double or triple hotplate

These hotplates can detect pans of different sizes. Depending

on the material and properties of the pan, the hotplate will

adapt automatically, switching on part or all of the hotplate and

supplying sufficient power to obtain good cooking results.

Familiarise yourself with the appliance

These instructions for use are applicable to other hobs. On

page 2 an overview of the models is provided, along with

information on measurements.

The control panel

Control surfaces

Pressing a symbol activates its corresponding function.

Notes

■ The settings will not change if several symbols are pressed at

the same time. This enables the programming zone to be

cleaned when food is spilt.

■ Always keep the control surfaces dry. Moisture can affect

proper functioning.

The hotplates

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show

those which are still hot. Avoid touching a hotplate that displays

this.

Even when switched off, the

œ/• light will remain on as long as

the hotplate remains hot.

If the pan is removed before the hotplate is turned off the

œ/•

indicators and the selected power level will appear alternately.

,QGLFDWLRQVIRU

SRZHUOHYHO³É

IXQFWLRQDOLW\¯

UHVLGXDOKHDW¤

SRZHUERRVWIXQFWLRQ°

&RQWUROSDQHO

IRU

PDLQVZLWFK

WRVHOHFWWKH

FRRNLQJ]RQH

3URJUDPPLQJSDQHOIRU

SRZHUOHYHOVHOHFWLRQ

DQGWLPHSURJUDPIXQFWLRQ

&RQWUROSDQHOIRU

WLPHSURJUDP

IXQFWLRQ

,QGLFDWLRQVIRU

WLPH

SURJUDP

IXQFWLRQ



Hotplate Turning on and off

Single hotplate Always use cookware of a suitable size.

Use only cookware suitable for induction cooking; see the section on suitable cookware.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH 375ME11E Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH 375ME11E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info