Bedienungsanleitung Siemens EH685DV19E (Seite 10 von 16) (Englisch)

527396

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Consisting of two independent zones

The flexible zone can be used normally as two independent

hotplates.

How to activate

See “adjusting the hotplate“ section.

As one hotplate

To use the entire hotplate with all individual zones.

How to activate

The hob must be switched on.

1.Place the cookware and press the þ symbol. The Nþ

indicator lights up.

The flexible zone has been activated.

2.Next, select the desired power level by turning the

corresponding settings disc for one of the two zones that

make up the flexible zone.

The power level lights up on the indicators for both hotplates.

The flexible zone is switched on.

Changing the power level

Change the power level by turning the control disc of one of the

two hotplates.

Adding more cookware

Press the

þ symbol. The new pan will be detected and the

previously selected power level will be maintained.

Note: If the pan on the hotplate that is switched on is moved or

removed, the hob will perform an automatic search and the

previously selected power level will be maintained.

To deactivate

Set to

‹ with the control disc.

Childproof lock

The hob can be protected against being accidentally turned on,

to ensure that children do not switch on the hotplates.

Activating and deactivating the childproof

lock.

The range must be turned off.

To activate: press and hold the

# symbol for approx. 4

seconds. The

@ symbol lights up for 10 seconds. The range

is locked.

To deactivate: press and hold the

# symbol for approx. 4

seconds. The lock is now deactivated.

Childproof lock

With this function, the childproof lock automatically activates

when a hob is switched off.

Activating and deactivating

All of the relevant information on the automatic childproof lock

connection can be found in the Basic settings chapter.

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Š.

Restrictions when using

This function may be used for all hotplates, provided that the

other hotplate in the same group is not turned on. (See figure)

Otherwise, the

› and Š symbols will flash on the display of the

selected hotplate; then the power level

Š is automatically set

without the function being activated.

Note: The Powerboost function can be activated in the flexible

zone when used as a single hotplate. In this case, place the

pan in the centre as shown in the Flexible zone section.

To activate

1.Select the desired power level.

2.Press the ›symbol.

The function has been activated.

To deactivate

Select a new power level using the control disc. The

Powerboost function has been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.















*URXS

*URXS

*URXS

*URXS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH685DV19E Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH685DV19E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info