Bedienungsanleitung Siemens EH975FE17E (Seite 10 von 16) (Englisch)

530248

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Childproof lock

The hob can be protected against being accidentally turned on,

to ensure that children do not switch on the hotplates.

Activating and deactivating the childproof

lock.

The range must be turned off.

To activate: press and hold the

# symbol for approx.

4 seconds. The

@ symbol lights up for 10 seconds. The

range is locked.

To deactivate: press and hold the

# symbol for approx.

4 seconds. The lock is now deactivated.

Childproof lock

With this function, the childproof lock automatically activates

when a hob is switched off.

Activating and deactivating

All of the relevant information on the automatic childproof lock

connection can be found in the Basic settings chapter.

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Š.

Restrictions when using

This function is available on all hotplates, provided that no other

zone in the same group is working (see diagram). Otherwise,

the

› and Š symbols will flash on the selected hotplate display;

then the power level

Š will be automatically set.

On hotplate number 3, the Powerboost function can be

activated at any time.

Note: The Powerboost function can be activated in the flexible

zone when used as a single hotplate. In this case, place the

pan in the centre as shown in the Flexible zone section.

To activate

1.Select the power level Š.

2.Press the programming panel located above the @› symbol.

The function has been activated.

To turn off

Press the programming panel located above the @› symbol.

The Powerboost function has been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

Time programming function

This function may be used in two different ways:

■ to automatically switch off a hotplate.

■ as a timer.

Turning off a hotplate automatically

The zone turns off automatically once the selected time has

elapsed.

Programming the cooking time.

The hob must be switched on:

1.Select the hotplate and the desired power level.

2.Press the 0 symbol. The x indicator on the hotplate lights

up.

‹‹ is displayed on the time program function display. To

select another hotplate, press the

0 symbol several times

until the

x indicator for the desired hotplate lights up.

3.Within the next 10 seconds, select the desired cooking time

in the programming zone. The possible default setting is,

from left to right: 1, 2, 3, etc., up to 10 minutes.

After a few seconds, the cooking time begins to elapse.

Note: The same cooking time can be automatically

programmed for the all the hotplates. The programmed time

passes independently for each of the hotplates.

The Basic settings chapter provides information on

automatically programming the cooking time.





*URXS

*URXS







 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH975FE17E Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH975FE17E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info